Results 1 to 7 of 7
  1. #1
    RC poster
    Join Date
    Jun 2012
    Posts
    12

    Will 2.8 trenchers fit on 2wd slash

    I just bought a 2wd roller and I have a new set of 2.8 Pro-line trenchers, will they fit without body mods?
    I plan to install a Pro0line Protrac kit after driving it a few times so I know what kind of improvments it offers.
    Thanks!

  2. #2
    RC Qualifier
    Join Date
    Apr 2012
    Location
    Pomona CA.
    Posts
    327
    I read in another site blog that they do fit? Urc to be exact http://www.ultimaterc.com/forums/sho...d.php?t=120341
    Traxxas Slash 2wd and Thunder Tiger Tomahawk Vx

  3. #3
    RC Qualifier
    Join Date
    Apr 2003
    Location
    , IN
    Posts
    972
    all rustler and stampede wheels will fit and are interchangeable to the slash
    Race Rustler 18/84
    http://tinyurl.com/5u8ave

  4. #4
    RC Qualifier
    Join Date
    Jun 2010
    Location
    New Hampshire
    Posts
    341
    Yeah they fit. I used to run them on my slash but....you cant run a body with them you will either need to cut the fenders off or get a thinner body from an emaxx/revo so the tires are exposed.
    An a word of expirence...tape them!! They expand like no bodies buisness
    "Duct tape and superglue are my spareparts"

  5. #5
    RC Qualifier
    Join Date
    Apr 2012
    Location
    Pomona CA.
    Posts
    327
    Sorry for the rookie question, what is taping? The foams , what?
    Traxxas Slash 2wd and Thunder Tiger Tomahawk Vx

  6. #6
    RC Qualifier
    Join Date
    Jun 2010
    Location
    New Hampshire
    Posts
    341
    You tape the inside of the rubber for the tread...its like belting a car tire...it makes it so that the tire cant expand while you are driving at high speeds
    "Duct tape and superglue are my spareparts"

  7. #7
    RC poster
    Join Date
    Jun 2012
    Posts
    12
    Thanks I got it together and had to raise the body and trim the wheel openings. The fronts only required a slight mod while the backs needed a bit more.
    Slashbasher24 I see you read my mind about a E-Revo body I was thinking of doing that have you seen it done before?
    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •