Results 1 to 4 of 4
  1. #1
    RC poster
    Join Date
    Jun 2012
    Posts
    5

    Question Cant bind TQi receiver and TQi transmitter aft Traxxas link firmware update for both

    I have a binding problem. Brand new Slash 4x4 Ultimate out of the box. Charged the battery, put new AAs in the transmitter. Played with it for about 2 min in my foyer. Then hooked up my iPhone 4 with Traxxas link. Updated the firmware for both transmitter and receiver. Now my transmitter and receiver will not link up. Do the normal binding provecure found on page 14 (Hold set on the receiver and turn on. Let go of the set button. Light flashes red. Hold reciver link button and turn on ESC. Let go of the link button and they should link in a few seconds.) The transmitter looks like it links as the light goes solid green, but the receiver just rapidly blinks green. Any help?

    Ryan

  2. #2
    RC Competitor
    Join Date
    Mar 2012
    Location
    Melbourne, Aust.
    Posts
    69
    Been there, done that. Transmitter is the problem, receiver should be fine. Try another remote or receiver to confirm.

  3. #3
    RC Enthusiast
    Join Date
    Jun 2012
    Posts
    44
    Did you turn on the transmitter first? My tqi won't bind unless i turn the TX then the car.

  4. #4
    RC poster
    Join Date
    Jun 2012
    Posts
    5
    Sorry for the slow reply. It was a firmware update that glitched on the receiver. Traxxas warrantied it and is sending me a new receiver. Problem is that I still haven't gotten it yet. Been down since day one. They say it is on back order.


    Sent from my iPhone using a widget thingy.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •