EMBE race build

[Mugs]

Nice one. Keep the vids coming. Like seeing what others are up to with their trucks.

[Emaxx1991]

Just ordered 4 2s 5000 mah 40-50c lipos for $126 shipped )

[50togo]

Not bad! My two spc were just short of that!

[Emaxx1991]

Built a new launch ramp today

I will get some videos on Sunday !!

[50togo]

nice! how fast do you plan on hitting it!

[Emaxx1991]

Full speed!!! Haha not idk know yet. I was hitting it at full speed with my 775 3906 and it was going prolly 8-10ft high and 15-20 foot distance

[50togo]

I have this one jump in the mountains you don't need that much speed I hit it fairly easy and hit 35ft without trying. Problem is anymore and I go into the bushes. Its more of a jump then a turn and back you the hill

[MITCH316]

Full speed!!! Haha not idk know yet. I was hitting it at full speed with my 775 3906 and it was going prolly 8-10ft high and 15-20 foot distance

Nice launch mate...Based on what I have seen with my mates eMaxx 3908 you should get double the distance no problem. You will probably get 15ft airs without even trying and some pretty wicked backflips.

I will be watching this thread for some good bashing footage .

[Emaxx1991]

I have some footage ready for y'all but it's a really short video I'm going to try to get some better footage this weekend

[Mugs]

Some vid's are always gr8 to see. Talk is cheap, but vid's back the talk up nicely.

[Emaxx1991]

I'll get a short vid ready for y'all !!

[Emaxx1991]

here is the vid for yall http://youtu.be/ad943-S75aU

[Mugs]

Nice one mate. Some nice backflips too.

[MITCH316]

Great to see the eMaxx in action

[Emaxx1991]

I will have a better vid soon..I'm still waiting on the parts to get here that I ordered jan 29th

[MITCH316]

Nice mate...I will be watching.

[Emaxx1991]

Finally got started on my FLM hybrids!!
I ordered 1 diff when I first bought my hybrid rear bulk(got good deal on ebay) which was the hyper 7 diff well then while searching eBay I found a good deal on 2 which said hyper 7 pro, now I thought they were the same but I found out today there not!











Since the first hyper 7 diff is .4mm wider from bearing to bearing I put .4mm (8x10)shims behind the ring bearing on the 2nd one to get it to the same width. since i had a limited amount if 13x16 shims!
Then I put .3mm 8x10 shim on the pinion gear next i had to add .4 mm 13x16 shims to the opposite side of the ring gear to take out the side to side play! and now it it fits great ! No side to side play and only about .2mm play on the pinion

So I think as far as ease of shimming the normal hyper 7 diff (all black)is Easier since I only needed the 13x16 shims on each side and the 8x10 shims for the pinion.
But the hyper 7 (red ring gear)fits awesome and almost just as easy as the normal hyper if I had more 13x16 shims it would have been easier, but instead I had to keep taking the diffs abort to get the shims inside the out drive cups (8x10)

[Emaxx1991]

[snookerd1206]

My eyes hurt lol. Looks good.


Sent from my iPhone 5

[Emaxx1991]

That last picture is to wake you up from my boring ramble in the post above it lol, glad to know it works !!

[50togo]

Nice. Yellow seals and all!

[Emaxx1991]

So I'm running into a problem mounting up the hybrid bulk to my stock chassis, it seams like the don't fit together right! There is a gap once it's all tightened up

[50togo]

Where is the gap?
You did get front and rear right

[Emaxx1991]

Yea the front has not came in yet the gape is where the chassis screws to the bulk on the top side. It's like the curve in the bulk does not Match the chassis.

[Emaxx1991]

Finally got her back together!! (window is tapped for a coating of flex seal)

[MITCH316]

Looking good mate...well done .

[Emaxx1991]

This dang thing is a TANK it's prolly a good 5-7 lbs heavier then my buddies erevo

[EMAXXBRUSHLESS]

Looks good maxx91 like the black and red colors

[josh62685]

For racing I would get flm's low center gravity chassis

[Emaxx1991]

I'm defiantly not racing this beast anymore lol it's to heavy Im getting the LCG chassis just to help handling