Results 1 to 4 of 4
  1. #1
    RC Competitor
    Join Date
    Sep 2011
    Location
    martinez calfornia
    Posts
    94

    gearing for mamba for speed runs

    what gearing do i need to reach top end with a mamba monster 2200 kv what gear and pinion? Not worried about temps thanks and i have looked all over and cant find a thread of it

  2. #2
    RC Qualifier
    Join Date
    Dec 2011
    Location
    Sillion Valley, CA
    Posts
    461
    Start with 25t-26t pinion and 50t spur and go from there. Make sure you have good lipo batteries (high mAh and C rating) since high gearing can consume lot of power.

    I run my mmp-2400kv with 4s-5s gearing 23/50 at the moment since i can't find a higher pinion with 3mm shaft
    For your 2200kv 5mm shaft, there are lot of options for higher pinions.

  3. #3
    RC Competitor
    Join Date
    Sep 2011
    Location
    martinez calfornia
    Posts
    94
    thanks man i will try 19-25/50 try different gearz

  4. #4
    RC Turnbuckle Jr. vxlrocket's Avatar
    Join Date
    Dec 2007
    Location
    Manassas, Va
    Posts
    6,654
    I run a 38t revo spur with a 19t pinion. That combo on 4s is geared for right around 85mph according to brian g's speed calculator.
    Associated rc8TE, rc8.2E, B4.2, Ofna LX2E, Slash

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •