So I bought a set of mudslingers for my summit and I was trying to find the Axial Rockster narrow wheels and couldn't find a set. So I bought a set of Axial eight hole wheels. Turns out cause they were so wide, they made the sidewalls bulge out and look kinda weird. They also rubbed real bad on the tie rods and a arms. So I decided to try to narrow them. Tell me what you think.
Here they are after I cut them and JB Weled them together.
Then I bought some of theses (M2X20mm)
Then on the back where they were cut, I drilled the hole deeper in the rim and screwed the two halves together also with the M2X20mm screws.
This is how much I cut out.
And here is the finished product. WAY nicer looking and should work better to.
Hers a couple pics of them mounted.