Results 1 to 3 of 3

Hybrid View

  1. #1
    RC poster
    Join Date
    Aug 2012
    Posts
    2

    ken block to summit

    I have a ken block vxl and in the process of converting it to a summit. I know I gotta get different a-arms, shafts, toe links and tie rods. I know not to get integy stuff as it looks better then it works. I wanna run 2.2 wheels and tires. Does any one know if the geode wheels are a traxxas bead only like what is on my tmaxx or will any 2.2 tire fit on them? I am looking at getting a set of axial ripsaws but would like to know if they fit on the geode wheels.

  2. #2
    RC Competitor
    Join Date
    Jun 2012
    Posts
    83
    You'll also need the long travel rockers, shocks, skid plates, body mounts... Any wheels with a 12mm hex, I've got rpm revolvers on my summit with yokahama geolanders....


  3. #3
    RC poster
    Join Date
    Aug 2012
    Posts
    2
    I know about the rockers, the shocks I'm just gonna get different springs.(already took the limiters out, I have only ran the ken ken block mostly offroad with offroad hpi tires). Skid plates I'm gonna hold off on for right now do to that I dunno what body and bumpers I'm gonna use.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •