Results 1 to 2 of 2

Hybrid View

  1. #1
    Traxxas Employee
    Join Date
    Jan 2011
    Location
    Plano,TX
    Posts
    55

    Binding the DTS-1 System to the TQi Transmitter and Traxxas Link

    For more information on how to bind your TQi transmitter to the DTS-1 System there has been a support article posted here: http://traxxas.com/support/DTS1-Linking-Binding.

    This article provides more in-depth information on the binding and updating processes.

  2. #2
    RC Racer
    Join Date
    Dec 2001
    Location
    Surrey, BC, Canada
    Posts
    136
    Quote Originally Posted by shutterm4 View Post
    For more information on how to bind your TQi transmitter to the DTS-1 System there has been a support article posted here: http://traxxas.com/support/DTS1-Linking-Binding.
    I'm pretty sure that article is wrong. Step 4 and 5 are the exact same thing in slightly different words:

    Step 4. Link the Starting Line console to the Finish Line console
    1. With the Starting Line console on, press and hold the SET button on the Starting Line console until it beeps twice.
    2. Switch the Finish Line console on. The consoles will link automatically.
    3. Leave the Starting Line console and TQi transmitter switched on for the next step.

    Step 5. Link the Starting Line console to the Finish Line console
    1. Press and hold the SET button on the Starting Line console until it beeps twice.
    2. Switch the Finish Line console on. The consoles will link automatically. NOTE: the consoles must be switched on within ten seconds of each other, or the link mode will time out.
    If I'm not mistaken, there's a vital step of rebinding the Starting Line Console and the TQi missing...
    http://www.tunamaxx.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •