REVO-SUM lowered hardened extended

[vipsan]

Hello
I wanted to show off my Summit. I added some of his reconfigured the lot of parts of the e-revo
Summit runs so much better at high speeds. They no longer rolling over in corners



List of changes

- Shock absorbers and springs E-REVO
- Rockers p2 E-REVO
- Pushers red alu 5318x
- Integy hex offset 12 mn
- Proline trencher x
- Desperado 1/2 offset
- Shortened fide
- Cutouts car body
- Zero chrome
- Neon Lights
- Castle Combo Flux/Blur 2200kv



===



===



===



===



===

[vipsan]

New body PONTIAC GTO cameleon

[87 GN]

Nice..... how are the diff hold'n up??

[Brewers74]

What is up with those hubs ? They look very different compared to others I've seen.

[vipsan]

What is up with those hubs ? They look very different compared to others I've seen.

These are 12 mm offset integy
Working very well just have to use blue Loctite

[steveski4]

Those are the Integy hubs I have had good luck with, and yes, def use locktite.

These are 12 mm offset integy
Working very well just have to use blue Loctite

[vipsan]

How do you think the 1717 1580kv mamba will not be too strong?
How do I get max speed on the 6s?

[Mugs]

New body PONTIAC GTO cameleon

Nice one mate. What color did you use on the engine air inlet manifold?

[87 GN]

hummm

well 24/54 is 52.44 mph, but a Spur/Pinion Reduction Ratio of 2.25:1 way off from 3.0 you want to try to stay close too..

[vipsan]

Mugs
I used the color silver to the air intake

87 GN
Now I use 18/58 2200kv motor on 4s and the speed is about 40mph
you write will use 6s mamba 1717 in it with 21/54 max speed will only 52mph? It's a bit poorly as he reach 70-80mph?

[87 GN]

Mugs
I used the color silver to the air intake

87 GN
Now I use 18/58 2200kv motor on 4s and the speed is about 40mph
you write will use 6s mamba 1717 in it with 21/54 max speed will only 52mph? It's a bit poorly as he reach 70-80mph?

ummm..

well I used the speed chart & 24/54... 2/3s...1580kv motor is 52.44 mph at 3.7v, fully charged at 4.20 will get you about another 5 mph..

the 1580kv is not really made for speed, now a 2650kv will give you some speed

[vipsan]

REVO-SUM completely destroyed
At 50mph speed hit the high curb snatching inch front suspension!

damage
-a broken chassis
-torn arms
-a broken bulkhead
-bent shocks
-torn crossover
-diff-cracked case
-damaged serva 2075
-and some other

I will never workout quickly where high curbs!

[87 GN]

do'h........

[humayrayakongkinaon]

i guess we all experience high speed crashes, except i got away with mine at one time. i smack mine at the rear end of my park car CRX and looking at it underneath it looks very ugly but when i move my car, there is'nt much damage to it but my ESC case was crack.

[IvVaum]

so what r u planning to do now?...fix it back up?....part it out?...burn it in effigy?

REVO-SUM completely destroyed
At 50mph speed hit the high curb snatching inch front suspension!

damage
-a broken chassis
-torn arms
-a broken bulkhead
-bent shocks
-torn crossover
-diff-cracked case
-damaged serva 2075
-and some other

I will never workout quickly where high curbs!

[rjm2519]

Nothing puts the value of your rig into perspective quite like seeing it tumbling on pavement. Or coming to a sudden stop. I have been there too many times, they are only parts and luckily they can be replaced. I am sure there are some upgrades you have been holding off on, no better time to improve on your truck.

Sent from my Torch!

[vipsan]

Yes I begin rebuild and again wants to create an even better REVO-SUM
I will not consisted of the old parts have already 90% new parts + new castle 2200
Add to Project

New TQI

Hitec servo 7955

CC bec 10a or 20a

More aluminum parts


existing work

[Money pit]

You only need a 10 amp bec, 20 is just overkill and harder to mount it. I borrowed my friend's spare for his helicopter and it's just too big. The 10 amp is plenty of power.