My REVO-E conversion

[humayrayakongkinaon]

things that you should'nt do, but you do it anyway....then... things go bad....result is this.

[Cameron]

Burnout on the arm?

Been there, didnt take pics...

[humayrayakongkinaon]

yeah....ouch!!!!

[Cameron]

never thought to just drop the thing? yeah me neither lol.

ow, ow, OW OWW, darnit, OW, OW...

[50togo]

Got that with the merv one time sitting in my lap!

[Cameron]

My kitchen floor got it once with my ERBE-Gt. Still have a couple holes in the lino to prove it
And a very realistic looking dent in the hood of my Corvette body...

[humayrayakongkinaon]

never thought to just drop the thing? yeah me neither lol.

ow, ow, OW OWW, darnit, OW, OW...

i could'nt just let go of it, the table have bunch of screws and parts laying around, if i let go things will be flying everywhere LOL.

[humayrayakongkinaon]

got a chance to run my REVO-E out today running on phaltline tires/blast wheels on 6s and it is uncontrolable....i can only open 75% throttle...the last 25% goes balisticly out of control lol. so i took the 2s out...running 4s and its much better and easy to control......maybe 5s will be the sweet spot.

[50togo]

On 4s mine was cake getting up to 53 but on 5s at 53 when I hit the throttle would just wheelie big difference!

[humayrayakongkinaon]

did some few adjustment with the camber/toe.....let see if i can fully throttle it on 6s

[50togo]

Do you use rpm's toe in and camber tools?
No matter how hard I would try without it was always off

[E REVO BY BULENT]

[humayrayakongkinaon]

Do you use rpm's toe in and camber tools?
No matter how hard I would try without it was always off

i normally just measure my toelinks, eventhough they are the same length, when you put the wheels, one side looks alittle off, so i test run it from there wether it runs funny then adjust. all my adjustment base on the car running characteristic, if i'm not happy with how it runs then i keep adjusting it til i get it right.

[humayrayakongkinaon]

thats one mean looking machine you got there.

[humayrayakongkinaon]

heres my short run video http://www.youtube.com/watch?v=lySIvg9CgwI

[87 GN]

LOL I thought we talked about running without the body.....shame on you.........

[humayrayakongkinaon]

LOL I thought we talked about running without the body.....shame on you.........

i sold both my bodies and the replacement is coming on its way lol.

[50togo]

Quite a bit more stable than a merv but I never go over ten mph with no body. Had a 65+ mph crash on the merv and the body came off. Wasn't nice!

[MITCH316]

things that you should'nt do, but you do it anyway....then... things go bad....result is this.

Ahhh...yes, the classic rubber burn mark. Looks painful. I haven't done that for some time now.

[humayrayakongkinaon]

Ahhh...yes, the classic rubber burn mark. Looks painful. I haven't done that for some time now.

yeah mate, this one is going to leave a mark lol.

[humayrayakongkinaon]

i've been so busy building my other onroad i totally forgot the dark side lol.

anyway i thought i'd show you guys what i've been doing.....here it is.


My ESC/Motor is the same as the MMP/2400kv castle but, my motor is a bit higher KV than the castle, its 2800kv with a 5mm shaft
this is way lighter than my previous SlayVo GT8

[Cameron]

Good golly, that PF8GT fits perfect on there...

How much wider are those Aluminum a-arms compared to stock?

[humayrayakongkinaon]

hole to hole 1/2" over all length 4 1/2"

[MITCH316]

Looks good mate....

[Cameron]

Too bad you wont find a 14mm 1/8 Scale GT wheel. Whats your solution for 17mm on the Rally? XO-1 hubs?

[humayrayakongkinaon]

thanks craig.

yep, waiting fo that in the mail too XO-1 hubs F/R along with the stub axles and universal dogbone with 3.5" lenght

[Cameron]

Right on, im still on the "i want a rally" train, but i would just try to on-road convert it anyways... How many do i need? lulz

[humayrayakongkinaon]

i did'nt hesistate, i went and grab one off ebay knowing that they are LCG chassis, perfect for onroad. my SlayVo is fast but very heavy 10.4lbs on 4s, 11.2lbs on 6s. i can get this one even faster with only 4s with tall gearing.

[Cameron]

I need a scale, would love to know what my GTP2e weighs compared the the ERBE-GT

[Cameron]

I would wonder if the STRC kit/hubs would widen the Rally enough to fill the fender gaps. They do not list an added offset on the website but the hubs certainly do add width. If it is only +12mm wider overall with those arms, a +6 to each side would be plenty.

[Cameron]

I would wonder if the STRC kit/hubs would widen the Rally enough to fill the fender gaps. They do not list an added offset on the website but the hubs certainly do add width. If it is only +12mm wider overall with those arms, a +6 to each side would be plenty.

Fellow in the 1/10 rally gallery uses this combo to fit the PF8GT
Pro-line Protrac arms with AKA adapters

Man... now i want a rally. Thats an easy swap out.

[humayrayakongkinaon]

pro track arms gives you 8mm total width, so 4mm on both side. mine goes over so i need to use a 17mm flush to the hub.

[humayrayakongkinaon]

since i sold my previous Platinum body, i decided to buy a new one and it arrived today. now thinking about what color i'm going to paint it.

previous body, miss it lol.


one i just got

[50togo]

might be a good idea!!

[noobrc]

Thats cool nice

[Nin01]

Im amazed at what you guys can do!
Some seriously nice stuff in this thread

[humayrayakongkinaon]

thanks, all this idea are base on all of our vets that are some still here and some are no longer here with us, pass it on.

[JohnnyT1992]

What ever color you decide to paint it, It will be cool for sure.

[humayrayakongkinaon]

What ever color you decide to paint it, It will be cool for sure.

i'm thinkin white with red stripe..... now, i just have to buy the summit red bead protector to replace the blue.... lol.

[E REVO BY BULENT]

thats one mean looking machine you got there.

thank you for sure ist a beast