Just ordered a new truck Ideas ?

[ChrisBroadhurst]

Hey guys just ordered a new truck sold my old one to my brother i have waiting to put on it

Integy Bulks
Full Cvd kit
Big Bore Shocks
Rpm Arms
Rpm Axle Carriers
Rpm Shock tower
Aluminium Chassis Braces
Aluminium Skid Plates

And if anyone has any suggestions on Wheel/Tyre combinations for Bashing please let me know.

[turbo_cat1]

I'd avoid the Integy bulkheads. If you really want aluminum bulks, go with a higher quality manufacturer's part; a nice substitute for a little style would be the ST Racing aluminum knuckles.

For wheels and tires, Proline Masher 3.2s are great, and they look sharp mounted on the old old E-Maxx wheels (part 4972).

Make sure you also get stiffer springs if you get the Big Bores. Gold is a good starting place - not too soft, not too firm.


Shock Spring Options by Lunitic, on Flickr

[upbasher]

Yeah everything you got there looks good except for the word "integy"....that makes me cringe...

[Dr.J]

Integy bulks arent quite as bad as integy arms. I believe they have a hd version on some parts, but generally, its good practice to just steer clear from integy except for heatsinks/springs. Make sure u get some offset wheels. The 3.8 chevrons are great for any terain.

[ajcar]

i got integy bulks, and chassis brases on my e-maxx. they do take a pounding. only those parts are ok for normal bashing


i know what everybody says about integy. maybe its not for the serious bashers who try to launch there e-maxx way over its limit.

put on what you like.

i do have hot racing bulkheads on another e-maxx, and they are sweet. the center comes out so i can change the diff quicker. i like to mess with possy diffs n stuff.

[M n M]

I have the RPM shock towers, and just like all the other RPM products they are awesome. But the more I bash and the more I read I am really seeing the benefit of have a good quality set of aluminum shock towers. The RPM towers flex a lot and can be the cause if bent shock shafts.

Once I save enough money I'm getting either some FLM or UE Knucklehead towers to match my FLM bulkheads.

+1 on staying away from Integy stuff. Like Dr J said… Heat sinks and springs may be fine, but the rest I'd stay clear of.

[minirevobasher]

I have the RPM shock towers, and just like all the other RPM products they are awesome. But the more I bash and the more I read I am really seeing the benefit of have a good quality set of aluminum shock towers. The RPM towers flex a lot and can be the cause if bent shock shafts.

Once I save enough money I'm getting either some FLM or UE Knucklehead towers to match my FLM bulkheads.

+1 on staying away from Integy stuff. Like Dr J said… Heat sinks and springs may be fine, but the rest I'd stay clear of.

You got some FLM bulks?
I would get the RPM true track in the rear.
Integy............

[M n M]

You got some FLM bulks?

No, not yet… Sorry for the confusion. I'm going to get the aluminum towers at the same time I get some FLM bulkheads.

[Captain_Rusty]

True track is a sweet addition to an emaxx for sure.

[minirevobasher]

Ya i love the true track. Aluminum chassis would be good to