+ Reply to Thread
Results 1 to 25 of 25
  1. #1
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,308

    found a new spot to bash today!!


    Grafenwoehr, Germany

  2. #2
    RC Turnbuckle Jr. mike-susieq1's Avatar
    Join Date
    Nov 2010
    Location
    California
    Posts
    4,753
    now that is a place to bash at. wish i was there. i have a place but not with tree but with cars and freeways. that is a nice place relaxing to run emaxx at. i could spend all day if i had the lipos to last that long or could hook up my charger and charge in my car i guess got a inverter to charge lipos + batteries.
    DEU 8:18 ESV

  3. #3
    RC Champion
    Join Date
    Sep 2011
    Posts
    1,346
    Sweet… Looks like a Bashers dream!

  4. #4
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,308
    Yea the only part that sux is its a service road and trucks aren't allowed on it and Germans are super picky so I have to pack the maxx on a mntn bike;( maybe I could get permission

    This is how all of Germany is its absolutely breath taking
    Last edited by cooleocool; 06-24-2012 at 07:27 AM. Reason: post merge

  5. #5
    RC Turnbuckle Jr. mike-susieq1's Avatar
    Join Date
    Nov 2010
    Location
    California
    Posts
    4,753
    my wife has been and says the same thing. My mother in law goes every year to visit family. nice place. i like the chocolate alot taste great and so much better than over here.
    DEU 8:18 ESV

  6. #6
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,308
    Defiantly I have some in fridge right now

  7. #7
    RC Turnbuckle Jr. mike-susieq1's Avatar
    Join Date
    Nov 2010
    Location
    California
    Posts
    4,753
    mail some this way buddy. JK. i get some every year about 10 bars, one year i got like 18 bars which was nice last me like 1 month.
    Back on topic, what battery setup you thinking about using on the terrian? looks a little loose to me with some hard packs around.
    DEU 8:18 ESV

  8. #8
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,308
    Prolly just going to use 4s I just got a new brushless setup so it should be fun

  9. #9
    RC Champion
    Join Date
    Mar 2012
    Location
    Idaho
    Posts
    1,207

    Since i can't drive for another month, i have to make do with around the house.
    Some running videos would be sweet! what 4s battery are you using?
    Emaxx #3903, MERV
    RPM/PROLINE

  10. #10
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,308
    2 2s ******* 5000mah hard case and my brushless setup is a hobby wing 150amp EZRUN and a tacon 2150kv

  11. #11
    RC Turnbuckle Jr. mike-susieq1's Avatar
    Join Date
    Nov 2010
    Location
    California
    Posts
    4,753
    whats your gearing going to be? what C are those? how are you liking your new brushless setup there.
    DEU 8:18 ESV

  12. #12
    RC Champion
    Join Date
    Jan 2007
    Location
    Hibernating in my basement, trying to see just how many RC projects i can work on at one time!!
    Posts
    1,268
    I'm going to have to find some new bashing spots soon, as well. Don't think they'll be as great as that!
    Slash BL-Pede-E 4Tec-FLM EMAXX-Wraith-AX-10-SCX-10

  13. #13
    RC Champion
    Join Date
    May 2011
    Location
    Biloxi, MS
    Posts
    1,514
    Its funny how when driving to work or around running errands, im always lookin around for a good place to play construction spots and gravel pits always seem best!
    Merv, Sl4sh, P4de, Embe, Slash
    2400/2200/4000kv

  14. #14
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,308
    Start postin up some pics of your spots

  15. #15
    RC Turnbuckle Jr.
    Join Date
    May 2011
    Location
    Fraser Valley, BC Canada
    Posts
    3,138
    Majority of my bashing spots are under water, way under water. Fre**** time so river is quite high. This is normally a good place to go bash, supposed to be a big river bar with some nice natural jumps and what not. The hard packed sand is awesome to rip around on, not sure how it'll look when the water recedes and the bar comes back. My bash areas get thoroughly cleaned and remodeled every year haha.
    I don't have shelf queens, I have bash kings!

  16. #16
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,308
    Quote Originally Posted by mike-susieq1 View Post
    whats your gearing going to be? what C are those? how are you liking your new brushless setup there.
    Im going to start with a 3.57 gear ratio 68 spur , 19 pinion and my lipos are 25~30c my esc has not came in.yet so im still waitin to try it

    Sent from my GT-S5570 using Tapatalk

  17. #17
    RC Champion
    Join Date
    May 2011
    Location
    Biloxi, MS
    Posts
    1,514
    Most recent spot next to a shopping center

    Merv, Sl4sh, P4de, Embe, Slash
    2400/2200/4000kv

  18. #18
    RC Turnbuckle Jr. mike-susieq1's Avatar
    Join Date
    Nov 2010
    Location
    California
    Posts
    4,753
    Quote Originally Posted by Emaxx1991 View Post
    Im going to start with a 3.57 gear ratio 68 spur , 19 pinion and my lipos are 25~30c my esc has not came in.yet so im still waitin to try it

    Sent from my GT-S5570 using Tapatalk
    nice setup to start, i'm starting with 21/68 will give a try to think stock setup 17/68. once i get my temp gun i'll try around with gearing like 17/58 or even 21/58 and see how that goes. do you have a fan for your motor? if mine needs one i'll pick one up to help keep temps more inline. the castle fan fits though i think it might be 2mm bigger.
    DEU 8:18 ESV

  19. #19
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,308
    Yes I went ahead and ordered the hobby wing motor fan

    Sent from my GT-S5570 using Tapatalk

  20. #20
    RC Turnbuckle Jr. mike-susieq1's Avatar
    Join Date
    Nov 2010
    Location
    California
    Posts
    4,753
    nice i dont think it would be needed but it gives a little more room for gearing increase temps go up. i might see temps go up with running up hills but can gear down if needed. i hear good things about the tacon motors in the e revo and emaxx one of the reasons why i wanted it at first. there is nothing like a large scale rc compared to smaller imo for me.
    DEU 8:18 ESV

  21. #21
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,308
    Yea I hope it lasts if not ill just get a mamba

    Sent from my GT-S5570 using Tapatalk

  22. #22
    RC Qualifier
    Join Date
    Jul 2010
    Location
    Beautiful SoCal
    Posts
    864
    Quote Originally Posted by mike-susieq1 View Post
    Now that is a place to bash at. Wish I was there. I have a place but not with tree but with cars and freeways.
    I know right! Cali sucks for bashing spots it's so urban it hurts.
    Jesus, Lights, RC, Minecraft, LoL

  23. #23
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,308
    Lol I haven't even gone out to that spot yet I really need to, I might today I have just been going to the track I built instead. I tend to break less at my track then while I'm bashing lol......I'm in the process of building a basher t maxx 3.3 and a basher EMAXX then I have my brushless EMAXX and my revo 3.3 for racing and a pede 2wd for the wife lol
    Last edited by Emaxx1991; 07-15-2012 at 06:58 AM.

  24. #24
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,308
    Quote Originally Posted by rustlersvxl4life View Post
    This is awesome!!I know what I'm saving for!
    ????? I'm confused lol

  25. #25
    RC Champion
    Join Date
    May 2012
    Location
    Australia
    Posts
    2,879
    I wish there were spots like that around here bashing. Pics look good.
    I'm a Rock n Rolla !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts