Results 1 to 2 of 2
  1. #1
    RC Qualifier
    Join Date
    Mar 2008
    Location
    Massachusetts
    Posts
    800

    Slipper assembly on nitro conversion tranny

    Hi Guys ,
    This is a qustion for my 3.3 conversion , I use a Titan 775 and EVX-2 .

    I notice on the slipper / spur assembly there is no spring on the nitro transmission like electric EREVO's ... on the nitro tranny it is just a washer on the back , washer on the front and the nut . do you add a spring for the conversions ?? I was getting WAY too much slipping so I just tightened it all the way down . But now its a wheely monster , just looking for a happy medium .
    ERBE - 8ight T/E - Kyosho Inferno

  2. #2
    RC Turnbuckle Jr. humayrayakongkinaon's Avatar
    Join Date
    May 2011
    Location
    Long Beach, California
    Posts
    6,201
    yes, nitro trans only use 2 dish like washer and no spring. if you try to put a spring, i dont think you have enough room to tightened the nut, nitro input shaft have a short threaded while the electric trans have longer thread.
    | Rally GT8 Powered By CC |

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •