Page 4 of 4 FirstFirst ... 234
Results 121 to 131 of 131
  1. #121
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    989
    I decided to take a video but my phones memory card decided to fail so I only had a 512mb in there so I have a short video...now I have a 32gb..

    http://youtube.com/watch?v=bpcvEfwjark

    Last edited by Kitteh298; 06-24-2013 at 09:31 PM.
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

  2. #122
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    989
    After nineteen months of hard running I have finally had to replace the half shafts and stub axles on my truck. These shafts are truly incredible. In other news, I stripped my rear hex, so I got Traxxas aluminum.

    I finally broke a crappy, sloppy, loose plastic/rpm bearing carrier, so I replaced them with STRC oversized rear hub carriers. Very nice piece and it comes with the bearings for both sides. Good deal for ~$19. Practically no slop compared to the plastic.






    Samsung Epic | Tapatalk 2
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

  3. #123
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    989
    Mounted my camera to the truck by way of a bolt and wing nuts for solid and easy mounting. I plan to make a video at some point. The truck itself is handling and running great....I also got a new phone.




    Samsung Galaxy S4 | Tapatalk 2
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

  4. #124
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    989
    My differential failure has finally come. The transmission was clicking when I got on the power hard. Then it just stopped moving...



    Samsung Galaxy S4 | Tapatalk 2
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

  5. #125
    RC Turnbuckle Jr. kdvanb's Avatar
    Join Date
    Aug 2011
    Location
    Grassie Ontario Canada
    Posts
    3,136
    Woah!!
    No surprise though
    Slash 2wd, Slash 4x4, 30th digger, Rustler VXL

  6. #126
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    989
    Haha yeah I was expecting it to happen for quite a while, just the nature of the beast. I actually bought a spare gear set because I know it will strip again..lol

    The new gears look like they are hardened some way because they were a different color than I have had before.

    Samsung Galaxy S4 | Tapatalk 2
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

  7. #127
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    989
    Long hard bashing is killing my tires slowly but surely, they have amazing grip and pretty good tread life actually. I ran into a curb at like 30/40 and blew two of my shocks(left side).. It also took out my lights. I redid them with a bunch of 1 minute epoxy



    Samsung Galaxy S4 | Tapatalk 2
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

  8. #128
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    989
    I was on my regular bash session at the local park(maple grove) and decided I would go farther than I usually do and I found a skate park where I broke LOTS.

    -The wires for my rear lights got ground off (my fault)..
    -Right side rear fender pretty much fell off.
    -Lost a screw for my left rear camber link
    -Bent my motor mount even more, had to make a new one.

    For my rear body mount I am using part of the rpm kit and 1/4" clevis pins cut off.

    Shoe goo and drywall tape is a wonderful thing.







    Samsung Galaxy S4 | Tapatalk 2
    Last edited by Kitteh298; 08-10-2013 at 09:10 PM.
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

  9. #129
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    989
    Been a while, the truck has been very good to me thus far, It's pretty much bulletproof. The chassis/truck in general is very strong, I'm thinking about selling a chassis setup.

    Smashed it into things one too many times and the shock didn't like that. ( you can also see the broken bulkhead)


    My tires are practically bald now, but they still handle great, I've been running it a lot lately. I finally got a bajr body too, my lhs had it for sale on consignment all painted bright, fluorescent orange and completely trimmed for $20 which was a deal I could not pass up. It's a really nice body, no more parachuting, can finally hit full throttle without flipping.


    Sent from my SPH-L720 using Tapatalk 2
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

  10. #130
    RC Enthusiast
    Join Date
    Mar 2013
    Posts
    49
    Are you using lipos?

  11. #131
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Brooklyn Park, MN
    Posts
    989
    ...yes I mainly use a SPC 5400mah 3s and occasionally use a hk 4s 5000.

    Sprint S4 | Tapatalk 2
    MM|2200kv 2WD LCG Slash - MM2|2650kv LCG Slash 4x4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •