That's nuts! Hate to be walking around in flip flops while you were out running around. OUCH!
That things a pig! I love it nice to see one as dirty as mine and not a show pony!
I would say ouch plus many other four letter words Gene. Thanks Pandee!
What length strap is that to hold your batts?
The Velcro side is roughly 5.75" long and the other side is around 6.75" (end to end). I melted a small hole with my iron towards the end and pinched them under the battery trays with the tray's screw going through the melted hole.
Last edited by BL-Bob; 06-21-2012 at 01:17 AM.
And it just pulls tight against the drive shaft housing and not against the shaft?
Yeah too tight and the bearing holder in the back starts to poke the lipos more than I like. A thin metal shield could be taped on the lipo at that spot to spread the pressure out. I just don't pull it real tight back there.
Are you running 8s?
Cars: erevo vxl, 1/16 summit, stampede vxl, tmaxx
Looks like 3s in parallel so 6s 8000mah
Yes, Pandee got it 6s 8000.
I was talking to my brother in doing the same with 5000mah packs to run in parallel then in series because 5000mah isn't getting me the result I want
Just ordered an XL speedy and 43s loops that I'm gonna run in parallel then in series for 10000mah 6s power!
LOL I was hard to understand what he was saying until your google translation