Results 1 to 3 of 3
  1. #1
    RC Champion
    Join Date
    Jan 2012
    Posts
    1,665

    Ride height - change Camber?

    hey guys,
    so i rised the ride height for better bashing and recognized camber looks to be much too positive as you can see in the pictures.

    I really don't want to mess up anything and the manual says: "When camber is changed, the toe angle of the wheel has to be reset."

    So i don't know what to do about it now. The rear seems to be even worse.

    Any suggestions?




  2. #2
    RC Turnbuckle Jr. jamann's Avatar
    Join Date
    Sep 2009
    Location
    Victoria B.C Canada
    Posts
    5,166
    The pillow balls in the axle carriers can be adjusted to help fix that issue


    Sent using lipo power
    Mountains cant stop me
    they have tried

  3. #3
    RC Racer
    Join Date
    Jan 2013
    Location
    College Station, TX
    Posts
    203
    +1 for jamann

    From experience, if you tighten the top pillow too much then you will have a suspension binding issue. I had this same issue when i first got mine and overtightened them and had literally no travel. After about a 1/2 turn in the loosening direction seemed to fix it though. best of luck

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •