Results 1 to 3 of 3
  1. #1
    RC Enthusiast
    Join Date
    May 2012
    Posts
    42

    Need measurements of trim tab holes

    Hey Ya'll..... I'm out of town and found a good deal on some trim tabs. Could someone please give me the measurements of the tab mounting holes. From the outter most hole to the inner most hole, the stock measurements and lenght and wide of the stock tabs.... Thank you all!!!!

  2. #2
    RC Racer
    Join Date
    Sep 2011
    Location
    Alden, NY
    Posts
    158
    Don't know the measurements exhackly! The holes are allready there in the iner hull. All you have to do is take a bright flashlight and shine it through the hull from the inside out. Dim the outside lights and you can see the spots. Then take a heated ice pic point and melt the outside hull away! There is a link on here somewhere explaining this. I'm sure someone will fix you up.

  3. #3
    RC Enthusiast
    Join Date
    May 2012
    Posts
    42
    Yeah I know that, the question is, what's the measurement of the mounting holes.... I found a set of non traxxas tabs and what to know if they will fit the hull

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •