Results 1 to 4 of 4
  1. #1
    RC poster
    Join Date
    Jun 2012
    Posts
    4

    Receiver led flashing red

    Hi, I'm having some problems with my Jato 3.3 TQI

    I turn it on and I can ran in small locations (about 10 meters). After this, the car loses signal and receiver flash red. When I came near the car the signal came back (receiver in solid green) and I can control the car again.

    My batteries are new and I replaced it again for another new pack of batteries (in car and control).

    Somebody can help me?

  2. #2
    RC Qualifier
    Join Date
    Apr 2011
    Posts
    527
    Unplug both the servo's, turn everything on, and start walking away from the car, if you have the same problem, plug in 1 servo, try again, then the other.

    Sometimes a faulty servo will cause this.

  3. #3
    RC poster
    Join Date
    Jun 2012
    Posts
    4
    Quote Originally Posted by Mind_Reader7 View Post
    Unplug both the servo's, turn everything on, and start walking away from the car, if you have the same problem, plug in 1 servo, try again, then the other.

    Sometimes a faulty servo will cause this.
    Thanks... I'll try this tomorrow

  4. #4
    RC poster
    Join Date
    Jun 2012
    Posts
    4
    Quote Originally Posted by Mind_Reader7 View Post
    Unplug both the servo's, turn everything on, and start walking away from the car, if you have the same problem, plug in 1 servo, try again, then the other.

    Sometimes a faulty servo will cause this.
    I tried this process and the problem still.
    I remove servo from channel 1 and the problem still. I put it again and removed the servo from channel 3 and the same problem.

    Somebody have any suggestion ?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •