Took my Slice A-3 racer, and set it up to bash as an mt. It is a 40mph slice of bash Heaven!
I have had all of the 2wd trucks, in many forms. This is the ONE!
22 cycles in the last 4 days, and it is just the BOMB! Out handles just about every rc I have ever owned. I have been jumping moderately (10 ft high and under), and really beating the living dung out of it. I literally cannot flip it over rough terrain at full speed. This chassis is the most stable thing on the planet. Had 1 failure in that time:
A suspension pin fell out. Thats it. STRC hinge pin kit on the way
I have reached rc Zen.
Slice A-3 chassis with velcro battery mount
AE sct stock shocks 55wt. Rusty springs on front custom springs on rear.
HR red front sway
Rpm bearing carriers
STRC ft bulk
Imex j-7 wide's
Link rx/tx and 2075
4x4 drive shafts
Hpi wheel bearings and Avid ceramic revolutions in the trans.
Stock slash bumpers, ft is cut down and lowered to fit under the Late Model body
Trans is a hybrid of HR graphite and full alum trans with strc top shaft and AE slipper
Slash 4x4 bell crank with modded shorter (47mm) center link and spaced spring
Vxl steel links
Best truck I have ever had.
I have about 2 hrs of cleaning ahead of me lol...
Best part is, if I change the gearing, tires, shocks, and body, then pull the velcro out and remove 1 screw, its back to racing on the oval in 5-10 min!