Braking not working

[BLING2940]

I have my revo for a little over a month now and my brakes stopped working im thinking its the servo because throttle works fine but the brake doesnt i looked at the arm and when i hit the brake the arm barley moves i tried to adjust the wheel but nothing.

[shizcol]

did u try zeroing the servo horn? take the servo horn off the servo, and set ur throttle to 0 and then put the horn back on.. sounds like ur not zero'd

[fallonguy]

Also the switch on the radio should be set to 50/50.

[zdragon71]

Servo could have stripped some teeth too. Remove it and take the 4 screws out from bottom and take a looksy.

[Lincoln87]

hate to state the obvious but whats the linkage like?? all set up right, nothing missing?
Have you tried tighting up your brake (as in the thing near the spring)


how many times have you had it out with the brake failing? could have been something on the disc/pads to cause it to not work well (ie WD40)

[BLING2940]

i do have it on 50/50,i have tried to tighten the brakes,im gunna try to zero the servo horn.thx for the help guys

[wildironman]

bring it ing and git it fix that whut i did

[BLING2940]

thx shizcol i zeroed the servo and it worksd great now