not sure

[Paintguy001]

evrerything is going good...but now after one night i go out and fire up the T and it won't hit...... i step back and look over the situation...... all i"s are dottted, all t's are crossed////// according to Traxxas manuel.... i have completeted break in step by step as writtten.... today i go out and model will not move....?? it starts as it should, but will not move. i want to know what now???? what to do next? i called traxxas and they said look model over..... i did this before i called, i am not stupid!!!!
my name is chris, my cell 513.617.6512, office 513.541.1522 home 513.388.0455 work, 513.541.1522 ...email paintguy001@yaho.com....... i have rechecked as instructed, and i see no reason for car to sit still.... what to do ????? please call or ask any questions to me on my cell..... this car has woked wonderfully for 4 days with no problems.... she made it thru break in.... then to do this????????? please help!!?? thank you. Chris

[RedRocketGTP]

When it's running and you give it some throttle does the engine rev? Or does it do nothing? Is the truck even responding to the transmitter? A little more infor would be better. If it is responding to the transmitter then I would check the slipper clutch and make sure it's tight enough. If it is then I would start looking into possible broken gears in the transmission and move in that direction. If It's not even running then I would probably start with a glow plug and re-tune back to stock needle settings and go from there. And please excuse me if I'm wrong I'm still fairly new to nitro. But not the hobby. so Anyone feel free to correct me if I'm wrong somewhere.

[Wildman4910]

The first thing I would check is the slipper, is the slipper adjusted correctly?
If yes are the slipper pads(3) still there?

Which model T maxx do you have?
Knowing which model will help to get you the correct answer as there are differences between the models.

Click the pics below for full size views.
Model 4910


Model 4908/07

[fallonguy]

Do you have reverse? If so try and shift it in reverse see if it will go then back to forward.