Glow plug???

[BLING2940]

I've had my revo for a little over a month now and a few problems but nothing serious but now i have this problem with the engine being way to hot and ill run it for about 10 minutes and the engine will stall i try to start it up but it wont i go back to it 10 mintues later and it will start up but still run hot i do tune it very often and now it will run for about 2 seconds and stall ive tried richening but nothing and i havent changed the glow plug yet

[REVO K'os]

put it at factory settings and see if it will stay running

[fallonguy]

That's what i would do is reset to factory and retune. Is it a new engine? Because not starting until after it cools is a sign of a worn out engine.

[BLING2940]

i dont know if its new i bought it used so i dont know the factory settings.

[fallonguy]

i dont know if its new i bought it used so i dont know the factory settings.

Here are the factory settings
Factory Carburetor Settings

[NITR0 newbie]

Easy-start or pull-start?
I've found that a hot engine is sometimes tough with a pull-start.

[fallonguy]

How hot are you running? If you bought it used you need to re set to factory settings and re tune. It needs to be tuned to the area you're in.

[zdragon71]

Your piston and sleeve sound worn out. It runs till it gets hot and stalls because when it's hot it loses compression and won't start again till it cools down. Time to trade engine to traxxas or just buy a new one off eBay. You can just rebuild yours also with a new sleeve/piston set for about $49 but if your bearings are rough as well you will save time and money buying a new replacement engine.