Finally Got A Lipo Balance Charger/Discharger and PSU!!!!

[MAXXSTANG3706]

Hey guys i've been running a BL setup on my EMAXX 3906 with a 2370kv inrunner 36mm diameter 550 sized can and ********* 150amp ESC with 2 6s NIMH 5000mah batteries. Yesterday I bought a Dectrum Supermate DC6 Lipo balance charger and discharger that can only charge up 2 5amps which is fine by me and a 120v PSU for $50 (for everything). My question is, what type of lipo's are you guys running in your EMAXX? I am thinking about ordering either a pair of 2s 5000mah 40c Gens Ace batteries or Sky Lipo 5000mah 40c lipos (which every brand i buy i plan on getting hard case). I am also a newb to Lipo batteries so any tips or info you guys have to share is much appreciated. Hope everyone had a good Memorial Day Weekend.

[bazookamaxx]

sounds good either set of lipos should be good (though you risk a bad time with Chinese stores so cross your fingers lol) 5000 mah should really only be charged at 5amps so you are set. Enjoy the new fun, its like a new truck

[PowerToTheMaxx]

Sky, Gens Ace, SPC, and Blue are all good mid-range (both price and quality) bateries. I havnt heard of one of them failing in a while. Make sure you know how to turn on the LVD in the ESC. I would get an external LVC just to be sure cause they're only like $11.

Just my 10 cents

[MAXXSTANG3706]

low voltage cut off? I have a program card that does all of that I love ordering stove from them just cause it's all cheap and some of the stuff on their sites is actually good quality.

[PowerToTheMaxx]

nice.

Does anyone know what the power converter rating is for a Thunder AC6? mine puked out.