SRT compatible parts

[ezimmerman]

I have (and love) my Traxxas SRT. What current models parts are compatible (Slash, Rustler, etc...). Stadium truck is making a bit of a small come back with the release of the losi 22.

Thanks

[Cipher_Jones]

I have (and love) my Traxxas SRT. What current models parts are compatible (Slash, Rustler, etc...). Stadium truck is making a bit of a small come back with the release of the losi 22.

Thanks

You Sir, have earned my admiration.

http://traxxas.com/pitpass/hopup/new...-Stadium-Truck

[harry697]

Most of the parts you'll need to keep the SRT going are still readily available. Transmission parts are interchangeable with the newer 2wd stuff and most of the suspension parts are the same as the Nitro Rustler.

Upper and lower chassis, battery boxes, trans cases, motor mount and guard, rear bulkhead and tower are the parts that you may have trouble finding, but they're still around if you look hard enough.

[ReaperGN]

Unless I am mistaken you can use a nitro bulkhead. You just have to cut part of the nitro battery box off to use as a spacer. I believe the nitro tower will also fit.

[Emaxx2.0]

Unless I am mistaken you can use a nitro bulkhead. You just have to cut part of the nitro battery box off to use as a spacer. I believe the nitro tower will also fit.

This is correct.

[harry697]

Unless I am mistaken you can use a nitro bulkhead. You just have to cut part of the nitro battery box off to use as a spacer. I believe the nitro tower will also fit.

Yes you can. You do need a shim and the camber link mounting holes are different, but it does work.

[ezimmerman]

so suspension parts from a nitro rustler, not a slash?

[danielhr77]

Yes, from the Rustler... This is my SRT with Rustler parts...

http://traxxas.com/forums/showthread...rbon-Fiber-SRT

[harry697]

so suspension parts from a nitro rustler, not a slash?

Rear arms on the Slash are the same, but not the fronts. Actually, if you decide to go with RPM arms, get the Slash rears because the Nitro Rustler rears don't have shock mounts on the front of the arms. If you go with O.E.M. the arms have mounts in the front and rear for different vehicle applications.

[danielhr77]

Right, I was confused, they are the same... The Rustler VXL is different... I have too many trucks in my mind...

[ezimmerman]

Sweet so I can upgrade to the slash bearing carriers on the rear too if needed.

[harry697]

Sweet so I can upgrade to the slash bearing carriers on the rear too if needed.

You can use Slash carriers, but they're a little different than SRT. I believe the Slash 4x4 uses the same carriers as the SRT though. Part #1952.