Mamba Monster E.S.C. wont calebrate!!

[traxxas emaxx]

I have tried everything and looked everywhere but it wouldent work all wires are good. I added the new fan to the top of the motor but that cant be it what is it?? HELP!!!!

[LD]

Best to give more details. Are the lights coming on in the ESC?

[traxxas emaxx]

The only light that comes on is the green one green flashes really fast and doesnt beeb like used to

[LD]

Here's a link to what the lights mean when calibrating and not calibrating http://www.rc-monster.com/forum/showthread.php?t=20020
Make sure your throttle trims (sub-trim and normal-trim) are at "0" before you calibrate.

The beeps come from the motor which acts like a speaker from the ESC's pulses. If the motors not hooked up or has a bad connection then you won't hear any beeps.

[traxxas emaxx]

LD I already knew all of that stuff and know what the have but thank you so does any body else have the answer!!

[87 GN]

ESC wire is pluged in with the brown or darkest wire out?
I would bind the Radio then try calibrating again, are you following the steps
truck on
hold full throttle turn on radio
beeps
full reverse
beeps
neutral
beeps......
I'm a thinking that is how it goes...

[traxxas emaxx]

Thank you all for your suggestions!! It turnes out all that it needed to have a nice cleaning and now it works good as new.