Can any one post the jato wheelie bar mod for the stampede
I have looked all over on how to do it but can't find it
RC Turnbuckle Jr.
Take a look at the pics I posted and see how it was mounted best way I found to mount it. It would be on the battery box in rear underneath. I drilled holes 1 size smaller than stock screws supplied so they fit tight. Center it right and be careful it doesn't move on you start the holes and them remove sheepish bar as to not damage it and drill holes through. You can remove battery/ rear bumper to make it easier and do it like hT too I did mind while still on the truck went a little off but worked good. Let me know how it goes.