Steering question

[Oldblue72]

Started converting my tmaxx to emaxx and not sure what steering to use. I have the 3922a long chassis and was wondering if the 3908 steering will work

[M n M]

Are you modding the T Maxx chassis to run electric or are you going with a new chassis?

Maybe someone that has done this can chime in but shooting from the hip I'd say if your modding the chassis to run electric I don't see a reason to change the steering. But again, I've never done this so I may be missing something.

[Oldblue72]

I bought a emaxx chassis with dual servo mounts[IMG][/IMG]

[M n M]

I remember someone else had an issue with trying to use the T Maxx steering parts on an E Maxx chassis.

I'd say to look up the parts needed for a 3905 E Maxx and go with that. You may want to consider upgrading the bell crank to a good aluminum one.

Also, although the E Maxx is set up for dual servo steering, you don't need two servos. One good strong metal geared servo will do the trick.

[87 GN]

the steering parts are different from the T to the E Maxx. I bought an alum steering kit for the E Maxx, but it was for the T Maxx so it did not work......

[LD]

For the chassis in the pic you'll want TRA4945 and it should bolt up if your using the T-Maxx suspension.

[Oldblue72]

Thanks everyone