my car wont calibrate

[salar_sikander]

hello i just got new rustler vxl
and m trying to calibrate it with my vechile but i dont knw for some reason it wont
here what happens...
i turn on my transmitter first and then the ez button until the light in esc turn frm green to red but the red light never blinks

[salar_sikander]

and so my car never connects with the transmittter can anyone here plz help i ld really appreciate that

[Petertje60]

As far as I know new Rustlers come calibrated. Are you following the procedure that is described in the manual?

[Bohican]

and so my car never connects with the transmittter can anyone here plz help i ld really appreciate that

if your trying to do what i think your doing, then you need to take the cover off of the receiver on your Rusty and push the link button
for a 2.4ghz radio system use this link
http://traxxas.com/support/How-do-I-...itter-receiver
if thats not what your trying to do then im clueless! hope it helps you out

[salar_sikander]

i have done that porcedure now what happens is that my car blinks twice and then it never blinks red

[Bohican]

http://traxxas.com/sites/default/fil...24GHz-INST.pdf
go down to the menu tree section of this link. try and unlocking all of your models from the transmitter then try to re-lock your rusty. if you have more than one vehicle locked to your transmitter then you will have to repeat the locking process with all of your vehicles. if that still doesnt work for you then head down to your LHS and have them help you out. most LHS help out with that stuff at no charge!!

[salar_sikander]

dude i dont what is LHS

[salar_sikander]

Actually guys m really a newbie someone told me that u dont need to bind ur car with ur transmitter as its already done at factory but i dont knw why it does not bind itself when i press the ez button the green light comes on but flashing and my car never responds can anyoone plz explian how to fix all that
what shud i do m so frustrated

[Petertje60]

LHS means local hobby shop. Or the store where you bought it.

Put the left knob on your transmitter in the middle and see if that works.

[salar_sikander]

yah i got email frm traxxas guy now my car is calibrated but my steering is unresponsive but when i trun the steering setting knob it turns a bit of wheels but when i try to steer the wheel they never turn

[Petertje60]

yah i got email frm traxxas guy now my car is calibrated but my steering is unresponsive but when i trun the steering setting knob it turns a bit of wheels but when i try to steer the wheel they never turn

There are a few settings on the 2.4GHz transmitters where you can adjust the steering with. Did you take a look at that menu?

[salar_sikander]

um yah i checked actually what happens is that my car moves forward and backward but it doesnt turn either side,
intresting thing here is that when i adjust the steering servo knob it turns wheel in quite erratic manner where ever the servo wants it to, not on my command

[Petertje60]

I would reset the transmitter to the stock values and if that doesnt work, you got faulty electronics somewhere. Transmitter, receiver or the servo.

Sent from my Transformer TF101 using Tapatalk