Truck's been way overdue for a good cleaning. So far the rear end is apart and clean right down to the screws...
Next up is to get the diff back together, it's been bulletproof so far.
Only minor damage found so far, two bent hinge pins. Both titanium bottom rear pins were bent just enough to make them a pain to get out. Ironic, the steel uppers were still straight as an arrow.
Parts change, LX-One shocks are off and UE Supershocks are going on. The stock turnbuckles are gone and Traxxas Tubes in their place. Also need a new wing, mine is warped and ground down. Looking at Losi 8T wings, but haven't decided yet, but most likely going with a black one this time.
So, just thought I'd share what happens when I get a little free time