Well, I finally figured out what was causing my slayer's throttle to stick at 1/2 throttle. I guess some where along the line I lost the c-clip holding the clutch bell and bearings in, so because the c-clip wasn't there, the rubber sealed bearing in the clutch bell fell out, meaning the clutch bell could move back and forth, and that means the gear teeth weren't alined with the spur gear any more, which in the end made the clutch bell's gear teeth to hit the slipper pads, putting HUGE gear teeth indents in the holder that holds the slipper pads in. I guess I should have noticed all of the "fine metal dust" gathering on my slayer, but I thought that was just beacause the clutch bell was wearing in or somthing. I guess I was right, the clutch bell REALLY was wearing in the slipper clutch pads. LOL. Go figure. As anyone else seen or had this happen to them? I'm still lost on why I even lost the c clip and bearing in the first place. PS I want to upload pictures, but I don't know how to. Can someone help me post some pics of the carenge?