will hitec hs-5086wp servo fit without any modifications

[Sandine Motorsports]

Just curious if this servo is a direct replacement that doesn't require modifications

[Jimmie Neutron]

In short, no.

http://traxxas.com/forums/search.php?searchid=482327

http://traxxas.com/forums/showthread...ghlight=5086wp

[Sandine Motorsports]

So from what i read the 390DMH is a viable option, that is a direct replacement that doesnt require any modifications. Waterproofing on this model is not a concern for me

[Jimmie Neutron]

390 Set Up

All stock hardware is used.
NONE of the hardware included is needed!


There are tab braces that do not allow the servo guard to sit flush.
IT IS OPTIONAL TO REMOVE THEM.
I have done this both ways without any adverse reactions.
Here is a picture of the braces:

(thanks goes to danielhr77 for the picture)
The tab braces create a small gap between the chassis and the servo guard.

Here is how it plugs in:



You will also need to reverse the servo direction.

These are the steps to follow to do so for LINK:

Hold MENU for 3 seconds
Green Blinks

Press MENU
2 Green Blinks

Press SET
Green Blinks

Press SET
Red Blinks

Press SET
8 Green Blinks

Hold MENU
Setup Complete

[Sandine Motorsports]

Thanks a ton for info