Help!!! Jato trubles
ok so i have a jato 3.3 pull start. i just replaced the oneway bearing and the pull start but it still wont work. i can get it to run but when i take out the igniter, the car shuts off. tryed tuning it but it didnt work. also when i get it running ill pull the throtle to get it warmed up and it will run away on me and i cant stop it. anyone have any ideas?
You need a new glow plug for starters. Then go back to "0" on the tx for throttle trim, and verify the opening for the carb is 0.7-1.0mm open at idle or even when the brake is applied.