Results 1 to 5 of 5

Thread: Differential

  1. #1
    RC Racer
    Join Date
    Jan 2012
    Posts
    219

    Differential

    Went to put on my new mip axles them I felt a lot of slop on the piece coming out of the differential. Other side is tight. Has anyone had this problem before. And if so how hard is it to rebuild my diff

  2. #2
    RC Racer
    Join Date
    Feb 2012
    Posts
    216
    Simple, 7 screws and its out.

  3. #3
    RC Racer
    Join Date
    May 2011
    Location
    Quebec, Canada
    Posts
    114
    Most probably is the differencial cup, had similar problem some kind of wobble, then change the cup and its was fine
    I change it with stock part but I know you can find in alluminium, if I got same probleme again I will go with allum.

    You msy want to check the bearing as well, anyway since you have to open the diff better check everything...

  4. #4
    RC Racer
    Join Date
    Jan 2012
    Posts
    219
    All bearings felt good got it back together and still have some play

  5. #5
    RC Racer
    Join Date
    May 2011
    Location
    Quebec, Canada
    Posts
    114
    So its should be the differencial cup, part no. 5381

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •