Results 1 to 4 of 4
  1. #1
    RC poster
    Join Date
    Apr 2011
    Posts
    6

    need help with radio

    hi i have stampede vxl and just bought ken block fiesta and i wanna put my stampede on same remote how do i do thta please send me link

  2. #2
    RC Turnbuckle Jr. JimmyNeutron's Avatar
    Join Date
    Oct 2009
    Location
    Alma, Michigan
    Posts
    12,290
    1) Make sure all batteries are in good working order
    2) Put a battery in your RC
    3) Open up the Rx box. (Rx, receiver)
    4) Press "SET" on the Tx. (Tx, controller, transmitter)
    5) Turn the Tx on.
    6) Confirm the red blinking LED on the Tx,
    7) Hold the LINK button on the Rx in the RC you want to control.
    8) Turn on the RC
    9) Confirm that everything is bound together via green LED shown on both the Rx and Tx.
    Whatever it is I just typed... could be wrong.

  3. #3
    RC poster
    Join Date
    Apr 2011
    Posts
    6
    and this will work er
    and how u swith to one to the other

  4. #4
    RC Turnbuckle Jr. JimmyNeutron's Avatar
    Join Date
    Oct 2009
    Location
    Alma, Michigan
    Posts
    12,290
    Once you do this procedure with each RC you want to control (up to 20 RC's) all you have to do is turn on the Tx and then the RC. The remote will figure out which RC you are driving and restore all of your settings.
    Whatever it is I just typed... could be wrong.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •