Hello all, I keep stripping wheel hexes and the wheel. I replaced everything on the rear. New diff, New RPM bearing carriers, new bearings. I replaced the whole slipper assembly. Have a KH motor mount and the aluminum slipper bearing adapter and MIP`s front and rear. I had desperados with trenchers on til i stripped the wheel and hex. I went through everything and put the stock wheels and tires back on and a half a pack later it stripped that wheel and hex. It keeps stripping the same one on the right rear. Anyone had this problem before and can give me any idea as to why it keeps doing this? I am running 2s lipo 20c. Also did i just ruin
both sets of wheels or is it a fix where i can use them?