slash 4x4 ultimate will not run

[TheWimpykid950]

hello I've got a slash ultimate with the tqi system and is was fine but when I was basing the truck stop so I got close to my truck but sill nothing but the truck and radio had green lights ( lipo mod)so I tured it of and back on on but nothiong so I puted it in ni-mh but still noting. I searched in the manuel and I tryed what I could find but nothing.
any help is nice
thanks

[johnh2005]

Will the wheels turn back and forth? Did you check the batteries in your controller?

[TheWimpykid950]

well no and yes enven changed em but still nothing

[johnh2005]

So, the wheels do turn left and right when you turn the wheel on your controller or not? Sorry if I was not clear in my first post.

[TheWimpykid950]

no nothing works but it's on ( controler and truck )

[TheWimpykid950]

can any one help me ? it's maybe the reciver?

[ASneakyGoomba]

If your reciever is solid green when you turn it on than the problem probably isnt your reciever. My guess would be esc or motor

[El Sob]

Call Traxxas support!!! They will help you out.

[Snowstorm355]

go into the reciver and unplug the servo and then try, if it works then send the servo to traxxas and theyll give you a new one

[TheWimpykid950]

thanks i'll try

[Agriganosa]

It is definitely a receiver problem because if it was something else you would have a problem with either turning or throttle.

[TheWimpykid950]

yes that's what I think thanks

[TheWimpykid950]

I rebinded the transmiter and the reciver but it's loosing the transmiter after I truned it off an it blinks green and red beside this issue it fine ( before the transitter gets off)

[Paxdad1]

Perhaps the antenna inside the transmitter has come unplugged/ snapped from the circuit board.

[TheWimpykid950]

I didn't thought of that I'll look thanks

[TheWimpykid950]

Thanks for your help eveyone I finally fond!!!

[montego650]

well what was the problem

[Paxdad1]

Come on wimpykid what was the problem???

[TheWimpykid950]

well I rebind the reviver and the transmiter right but I had to press 2 times the menu button ( or to hold it )