Results 1 to 2 of 2
  1. #1
    RC poster
    Join Date
    Mar 2012
    Posts
    1

    EZ-Peak Plus Only Senses 5 cells when I have 6 Cells

    I just got the EZ Peak Plus charger and two new LiPO 3s batteries. I charged them with the Dual 3-cell Balance Board the first time and they ran great. Now when I plug them in using the Dual Balance Board the charger only detects 5 cells instead of 6. When I plug each battery in individually without the Dual Balance Board each battery will show 3 cells. What gives???

  2. #2
    RC poster
    Join Date
    Mar 2012
    Posts
    9
    I have a similar issue. I have the dual 2s charger adapter. When I connect them, it will say 3 instead of 4. I called traxxas support and was advised to start the charge, then push one of the middle 2 buttons (don't remember which) and it will list all cells. Was advised if it showed voltage of all 4 to let it charge, if not stop it and call back. So in your case, connect it all up and see if its showing voltage for all 6. If it is showing 6 you should be good.

    thx
    Willie

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •