Results 1 to 5 of 5
  1. #1
    RC Competitor
    Join Date
    Oct 2011
    Location
    Victoria, Australia
    Posts
    86

    looking to replace steering servos

    I have a dual 2075 steering servo setup on my slayer pro, whould hitech work well or are they too expensive. i have 2 old futaba servos from a 15 year old car, but i dont think the would work well
    You don't need to plug Nitro into the wall

  2. #2
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the wet stuff on the hot stuff
    Posts
    9,846
    A lot of people go with Hitec but you need new servo horns as the splines are different.
    The Super Derecho

  3. #3
    RC Champion
    Join Date
    May 2010
    Location
    Nova Scotia ,Canada
    Posts
    1,246
    I am using a single hitec 7955 on mine. It comes with a servo horn.

  4. #4
    RC Turnbuckle Jr. CarGuy7a's Avatar
    Join Date
    Dec 2008
    Location
    Gettin' Lucky In KY
    Posts
    3,882
    Go with a hitec 645MG. One of them should be plenty strong enough. They are only $31. Traxxas also makes a set of servo horns for the Revo that will fit non traxxas servos. I can't think of the part # off the top of my head though.

  5. #5
    RC Turnbuckle Jr. fallonguy's Avatar
    Join Date
    May 2006
    Location
    Dayton Nv.
    Posts
    3,181
    Quote Originally Posted by CarGuy7a View Post
    Go with a hitec 645MG. One of them should be plenty strong enough. They are only $31. Traxxas also makes a set of servo horns for the Revo that will fit non traxxas servos. I can't think of the part # off the top of my head though.

    It's 5345X and their around $10.00
    I wanted to put a really cool signature but I ran

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •