Results 1 to 2 of 2
  1. #1
    RC poster
    Join Date
    Feb 2012
    Posts
    6

    lipo 5000 battery with 13.2 volts

    I charged my battery(pretty sure it was on lipo setting) and it was around 13.5 volts when I stopped it. Just leaving the house so I didn't want to leave it running although the charger has an auto stop.

    anyway the brushless slash is not running because of too much voltage(blinking red and green).

    can I discharge the battery, I have not had this problem before and am new to this.
    the battery is not swollen and was not hot at all.
    thanks,
    Edwin

  2. #2
    Marshal ksb51rl's Avatar
    Join Date
    Nov 2006
    Location
    Northern NJ
    Posts
    15,478
    If this is is a 3S battery, the maximum voltage should be a 12.6 volts. If your charger is not stopping, you are either using it incorrectly or it is broken. I would be very careful of that battery since I cannot believe it is not damaged.
    Alt-248 on the number pad =

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •