brand new 4x4 pede

[BAMAFAN]

Ok cool. Thanks guys. That helps alot.

[DiggerPede]

There is a quote too much in your link.... 5mm 8 mod Pinion

Thanks for the rescue. No telling what I did. LOL

[BAMAFAN]

WHOOPS!!!!!Proline bit the dust against the 6x6 post. Just a couple of other minor things wrong. Nothing major though.

[BAMAFAN]

Just a pic of my setup and fans. I run 3s all the time. After 2 hours of running the motor was only 167 degrees. This is the 3500 Velineon. 54/17. It will run in the 50s all day long.

[new2bashing]

bamafan

what upgrades did you do to prevent stripping spurs and burning out motor mount bearings?

just the srtc mount?

[BAMAFAN]

The key to stripping spurs in to make sure you have the mesh set correctly between the spur and pinion. I also hava a kingz head motor mount anda solid center diff. I have also changed out my motor bearing to ceramic bearings by protek. Im sure there are many other brands but these are about 11 bucks a pair. If you prefer not to use the solid diff then get the aluminum bearing carrier on the slipper clutch. It will keep from melting the plastic on 3s.

[new2bashing]

i use the king headz alum bearing barrier with the king headz motor mount on my slash 4x4 and still
break motor mount bearings on 2s

i guess i need some ceramic bearings

[BAMAFAN]

I decided to try out the Tbone racing rear bumper. Had to improvise a little bit. Here are some pics.This is made from a stock slash rear bumper so i can use the rear sway bar.Go ahead and assemble the piece and sway barThen install brace over the topAssembled

[BAMAFAN]

Sorry for the quality. Took from my Iphone. The only thing I need to do is made a little aluminum piece to hold in the hinge pins. It was suppose to have some kinda shim in the kit but it wasnt in there. Oh well.

[spenniepoos]

nice pede man looks sweet Are you running the vxl on 3s.

[BAMAFAN]

All day long. It's a good system IMO if your not gonna run over 3s. Just don't bury it in mud. The esc button will stick eventually. And I run a fan on both motor and esc

[spenniepoos]

bamafan what pinion are you using on your set up dude

[BAMAFAN]

17 tooth. Probably gets up to about 45 or 50 mph. And torque is crazy.

[f687s]

those are some nice pics

[DriveItLikeYaStoleIT]

Heres some pics with the Protrac pretty much installed with MIPs installed. STRC towers. Lunsfords hinge pins. I was shorted MIP set screw on rear. Its on the way. Got some Proline 17mm adapters today. Theres a little suprise behind that. I ended up putting a Slash 4x4 chassis in the middle for the extended body length and width. Used all MOJO hex screws and a STRC steering kit, driveshaft, motor mount and hubs. More to come in the next week or so. Stay tuned. Here are some pics of progress. Im gonna sell some stock parts to fund my wheels and tires....,

Sic Pede! What MIPs are you using with your pro-trac kit? I'm using MIP 11109 and 11110 and I'm not sure if there compatiable with the protrac kit

[BAMAFAN]

I dont remember off hand. Ill have to go back and look at my reciept. I do remember I had to order longer dog bones out on the end.

[BAMAFAN]

MIP10130 rear kit. MIP10132 front kit. MIP11105 is for the extended dog bones. You need 4.

[BAMAFAN]

Heres an update on my 4x4 pede. Back to stock chassis. New lid. a RPM slash rear bumper modified. And a Tbone racing rear skid with it. Front bumper and skid on the way. Should be well protected.

[O.G.]

Nice rig. I really need to get a Slash or Pede 4x4..

[Thomas P]

Heres an update on my 4x4 pede. Back to stock chassis. New lid. a RPM slash rear bumper modified. And a Tbone racing rear skid with it. Front bumper and skid on the way. Should be well protected.

Looks ace mate, way better then the "slash setup".. Love the lid =)

[rc driver dude]

Why did you change back to the stock chassis?

[BAMAFAN]

Thanks Thomas P!!!

rcdude....just wanted some change. missed the wheelies....lol

[speedpede09]

Nice truck, looks really good with the c-10.

[BAMAFAN]

Thanks SPeedep

[rc driver dude]

Cool, thanks.

[NewbieToTraxxas]

Wow this with a MMM 2400 is basically my dream rc! Nice work! SoooOOooOOO Jeally

[BAMAFAN]

Thanks. I have a 2200 combo that was gonna use on my Summit....well I did but its just ridiculous amounts of power.I may go back to the Slash chassis and run it.

[Petertje60]

I was looking at your Tbone wheelie bar pics and noticed you didnt put the plastic cap that comes with it against the bulk head tie bar. Is there any reason for that? Pity the 2200 is just a little too much to fit in the Pede chassis. That is what I like about the shorter 2650.

[BAMAFAN]

My Tbone kit didnt come with the caps. It was missing a couple of pieces. My kits for the Summit were missing a couple of things too. I just dealt with what I got and they work great.

I didnt realize the 2200 was to long. I havent even tried to put it in there. I may look into the 2400 or 2650. I hear and read good things about both.

[Strykeviper]

What chevy body is it on the slash chassis?

[Petertje60]

My Tbone kit didnt come with the caps. It was missing a couple of pieces. My kits for the Summit were missing a couple of things too. I just dealt with what I got and they work great.

I didnt realize the 2200 was to long. I havent even tried to put it in there. I may look into the 2400 or 2650. I hear and read good things about both.

Ok. That makes sense.
About the 2400 and 2650, both are great choices and make some more RPM on the same voltage.

[BAMAFAN]

Did some changes again today. Went ahead and put the 2200kv set up in until I can get a different motor. I still like the performance and temps on 2s. Running 54/17. Here is a couple of pics.With his big brother.

[BAMAFAN]

Can you run the 2400 or 2650 with my esc.

[Petertje60]

Can you run the 2400 or 2650 with my esc.

As long as you stay within the 5S and 4S specs I dont see a reason why not.

Sent from my Transformer TF101 using Tapatalk

[BAMAFAN]

Strykeviper.....ita a chevy 1500 crew by Proline for the 3.3 Revo not the 2.5. Part #3230-00.

[Strykeviper]

Strykeviper.....ita a chevy 1500 crew by Proline for the 3.3 Revo not the 2.5. Part #3230-00.

Cool. Thanks. I'm not a ford fan and there doesn't seem to be any dodge bodies out there. So that's the next best thing.


Sent from my iPhone using Tapatalk