Results 1 to 5 of 5
  1. #1
    RC Competitor
    Join Date
    Sep 2011
    Location
    College Station, Texas
    Posts
    96

    How to use Castle link on mmp sct

    Do you have to get the Castle Link USB Programming Kit to program the mmp sct, because in the drivers ed book that it comes with it says that mamba escs have a usb plug built in but i can't find it?

  2. #2
    RC Racer
    Join Date
    Jun 2011
    Posts
    222
    Yes you must get it...

  3. #3
    RC Racer
    Join Date
    Jan 2012
    Location
    Stromsburg, NE
    Posts
    133
    I think the mamba monster has the port. on the mmp you unplug the wire from from the rx and then either buy the castle adaptor or the field programming card and plug it into them. Then there is a mini USB port on each if those.
    Hope that helps

    Sent from my DROID BIONIC using Tapatalk
    Sl4sh with CC MMP 3800, 2 mervs, a 3905 BL eMaxx,

  4. #4
    RC Champion
    Join Date
    Nov 2010
    Location
    Lilydale, Victoria, Australia
    Posts
    2,845
    Only the older Mamba Max had a built in USB port, every other Castle ESC requires the adapter

    ESC can be manually programmed for most functions, but the software makes life a lot easier

    Cheers
    Slash Platinum
    Xerun 150 / Tenshock SC401 3500kv

  5. #5
    RC Turnbuckle Jr. El Sob's Avatar
    Join Date
    Feb 2010
    Location
    El Sobrante, Ca
    Posts
    7,549
    You might as well get the field link. You don't need a computer to adjust it. You can then plug the USB into the field link to connect it to your computer. It's around the same price.
    Slash Ultimate, ET-3S, 2400, MIP, King Headz, RPM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •