Dude take a few ounces of water and hit it with 100mph gust of air and watch it turn to mist.... if my car blows over at 110+ the last thing I'm worried about is a little water that's just silly... Also those who are running 8s are probably only making a couple passes and shutting it down my car should run non stop as lOng as I want
On second thought I'll stay out of this. Good luck PBO.
Last edited by BL-Bob; 03-09-2012 at 04:29 PM.
Regardless of what any Lipo company claims there is no such thing as a water proof lipo, if you notice every water test always shows the plugs and balance tab out of water. Sure the chances of a problem are slim but the threat is there. I was referring to the fact you using a non water proof ESC and the fact that eventually it will be a problem and seeing the XO-1 track record of flipping and crashing i see you having problems sooner than later. I was just providing a fair warning. Either way i think im done here and ive made my point clear regardless if anyone agrees with me or not. Before we start beating this dead horse any further, i wish you luck on your attempt.
PS: remember the XL2 isnt a VXL......water damaged isn't covered by castle period its a substantial $ risk your taking.
I used to be into scalers (honcho). And i would drive it through cricks and small rivers. My lipo's would be 100% completely submerged at times and I never had a problem with them. And I also did nothing more than shake the excess water out of them before recharging them. Obviously no manufacturers would endorse such use, but this has been my experience.
Losi 8ight-T 2.0 is 15.09 wheel base
So we are talking less than and inch difference in wheel base which is what really matters here. Also i can tell you owning both cars the truggy is heavier than the XO-1 fully built. I don't have a scale so i cant weigh my truggy just this second but to give you an idea the nitro truggy RTR nitro fueled up is exactly 9 pounds according to there website. Brushless power set ups like this are always heavier than there nitro counter parts. Calculate how much heavier the 1717 is than the standard big block nitro motor......and then factor in a 8S pack plus ESC.....
Believe my friend BELIEVE.......
PS: buggies are always much shorter than there truggy counter parts
Buggies are 2-3" shorter than truggys depending on make & model
MiamizFinest, what sort of wheels/tyres are you using for 112mph on your truggy?
Just upgraded my canards they now have virtually no flex were before they were very flimsy now when I push on them they compress my shocks with 2.3mm springs!!!
^ I like that..
100+mph tc4 neu powered
When you do it make sure you drill your hole in the right spot try to split the difference front to back and I made mine so the hole was right in front of the lip on the underneath side of the canard just make sure to leave enough space for bolt head so it doesn't bind up on that lip if you look at the bottom of yours you will see what I'm talking about
That's pretty nice work there. I like it.
Thanks I just felt like they were way to flimsy if I barley touched them they wiggled so I could only image how much they must shake and bend at 100mph
I'm gonna get some aluminum ends for it the plastic ones have a little play in them so when I change the ends it will be rock solid and function the way they were intend to function
Ordered a 36 tooth and a 42 tooth pinion gear today this thing is gonna fly with the 42 on 8s lol that is if my batteries ever show up!!!
How do you plan to run a gear bigger than 36t pinion? Looks like it will hit shock spring.
100+mph tc4 neu powered
I flipped my rear arms and my shocks are now on the back side I have no limitations when it comes to space
Ok so I got the 42t pinion gear and it's huge lol I haven't tried to instal it yet but it looks like the only complication will be the chassis floor actually it's not the chassis but the diffuser it MAY take a little dremel work to get it to fit but I have extra diffusers just for experimenting so we will see what it's gonna take to get it in there here soon i will post a vid once I get it in there
I will say the gear that I ordered is thinner than the stock pinion gear and I'm not sure if that gonna make excessive wear on the spur gear but it will only be in for a couple insane speed runs and then I will go back to the 34 or 36
Also I would like to add for those who keep saying my water cooling system serves no real purpose go read the thread "a great day of running" this is exactly what I planned to fix!!!
Traxxas them selves clearly say not to run the car at lower speeds as it will over heat and ducati777 clearly states when trying to race around with others cars in a short coarse setup his thermal alarm went off several times I garuntee I will not have to worry about this at all
Again does it have to have it NOPE but will it serve a purpose YOU BET IT WILL!!!!
Cool brotha looking forward to seeing it.
100+mph tc4 neu powered
dont forget the old school vw bugs ! lol
Oooo I'm named!
Yep, 34 pinion, racing on a short course caused my motor to run hotter than I would have liked. Also, that alarm comes on at its own level, doesn't seem to matter if you change it on the dashboard....
So I guess the question is would I prefer better slow speed cooling, or regearing each time I move from speed venue to racing venue...
Option 1 certainly sounds easier...
But I'll stick with Option 2 for now... I'll regear for Saturday so I don't have to worry about temps this weekend. If I'm geared too tall, I'm wasting energy through heat. Sure we could build a bigger cooling system, but I prefer to run more efficiently.
Now... if someone could just make a nuclear, or infinite energy battery.... we could use gigantic cooling systems and disregard efficiency! Hmmmm a man can dream.
+1^, four screws and a grub and your done swapping pinions.
Would you drive your real car locked in overdrive in the city?
Dude my car on 8s won't care what pinion gear is in there get over it
Here is a update I have everything mounted and plumbed I decided not to use the fans over the motor this is how it's gonna be only with 4s lipos I will do the wiring probably Sunday or Monday
And then I will focuse on exterior appearance
Can I suggest some cable/zip ties on that plumbing
Ohh yeah it will get that or maybe something else if I can find something that looks better all plumbing is 1/4" so I was hopeing to find some cool clamps "aluminum/chrome" from like jegs or summit for show cars just to really set it off
Hey junkie, did you get those pm's I sent you?
The batteries I order are the 65-130c 5000mah ******* I'm not sure if im going to be able to use the factory clamps... I will come up with something when they come if they dont fit in there... I know I'm going to eventually order the thunder power g6 70c 7700mah but they are expensive
I have built all of this for less then the original price of the car I paid 975 shipped and sold my complete telemetry system with the esc for 525 plus I even bought a charger and I think I'm just now back close to my original purchase price!!! Lol
I haven't had a chance to check it i did c you comment on utube I just had a baby last week and been working a lot of hours so its been hecktic I will check it and send you a detailed list here soon
So what's left? When will you drive it?
Should have it ready to run by the time I get my lipos wich they are on there way just not sure how long it will take to get to Ohio from china...
This might be silly but has anyone considered a parachute system for the xo-1 to help minimize damadge when the car goes airborne I know that it would take some quick reflexes but I watched a vid of a guy runnin 130+ (wich is what i am shotting for) with a rc car and when it went airborne I know it had to have went 30+ feet high and if he had a parachute it defiantly would have reduced impact...