Results 1 to 2 of 2

Thread: Odd ESC Issue

  1. #1
    RC poster
    Join Date
    Oct 2011
    Posts
    5

    Unhappy Odd ESC Issue

    So I replaced my servo in my 4x4 and drove it for about 10 seconds on my 3s and then it stopped. From then on it wouldn't power on, not even a light. I checked the connections with my multimeter and its getting power to the ESC.

    Here's the weird part, when I connect the standard nimh batt that comes with it, the ESC will blink: green, red, red then power off. So it won't even blink with a 3s, but will with the 8.4v.

    If I unplug the motor it stays green and won't power down. I've also tried cleaning the button off too but it clicks fine. Also removed the servo but didn't do anything.


    Have you guys had any problems like this before? Its only had a few packs run through it in a year, hardly any wear.

  2. #2
    RC Turnbuckle Jr. El Sob's Avatar
    Join Date
    Feb 2010
    Location
    El Sobrante, Ca
    Posts
    8,113
    Is it a Traxxas server? Might be drawing too much power from the bec.
    Slash Ultimate, ET-3S, 2400, MIP, King Headz, RPM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •