I am trying to bind my 3ch TQ 2.4ghz receiver with my 'older' TQ 2.4ghz transmitter (the one with fold down antenna) but not having much luck. After I make sure the Tx is in pairing mode, The second I turn on the esc while holding the Rx Link button, the tx turns solid green while the Rx continues to slowly blink red.
Is this common or Is there something I am not doing correctly? Do I have to 'unpair' the Rx from its original Tx before it can be paired with another Tx? Because The Rx still gets connected to the original, 'newer' Tx (no antenna one) okay when I turn those both on.
I have never bound a new tx before, so if any one has any tips before I call traxxas monday, I'd appreciate it.