+ Reply to Thread
Results 1 to 12 of 12

Thread: Help needed!

  1. #1
    RC Competitor
    Join Date
    Nov 2011
    Posts
    94

    Help needed!

    Hi, i would like to replace the rear suspension pin set (they bended), and in the Summit manual, the part number is 5321 it's written 3x20mm(4) and 3X40mm(2) when i took out the bended pins out, they are longer then 40mm they are 85 mm long i need some help before i order the part number 5321.
    Thanks in advance.

  2. #2
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Belgium
    Posts
    305
    Hi I have in my hands a brand new 5321 kit (bought as a spare just in case) and I confirm that I have 2x 3mmx85mm and 4x 3mmx24mm pin inside. A+


    Sent from my iPhone using Tapatalk




    Sent from my iPhone using Tapatalk
    Last edited by ksb51rl; 01-19-2012 at 01:04 PM. Reason: merge

  3. #3
    RC Competitor
    Join Date
    Nov 2011
    Posts
    94
    Thanks Scaniris, for your precious help, i'll order it now that i'm sure. So there's a mistake on the summit owner manual and the traxxas web site.

  4. #4
    RC Qualifier
    Join Date
    Jul 2010
    Location
    astoria
    Posts
    354
    get the lunsford titanium hinge pins... they are well worth 25 bucks.. and you will never have to worry about bending them.. i haven't bent mine and i run aluminum a-arms... and they make it soooooooo much easier to take apart because they never corrode.. its one of the best investments i think.
    custom summit crawler parts lol

  5. #5
    Marshal ksb51rl's Avatar
    Join Date
    Nov 2006
    Location
    Northern NJ
    Posts
    13,435
    I have a Lunsford set on my ERBE. I bought the parts piecemeal on eBay. Highly recommended even though I never had any problem with the stockers.
    I know they're having their break there by your brake drums. No, you're not invited.

  6. #6
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Belgium
    Posts
    305
    On eBay I found some Lunsford hinge pins for Revo. For e-revo, only for the 1/16... So are the Lunsford hinge pins for 1/10 Revo also compatible with the Summit?

  7. #7
    RC Qualifier
    Join Date
    Jul 2010
    Location
    astoria
    Posts
    354
    yup i got mine for the e-revo...

    and i got mine because my aluminum a-arms snapped a stock one..

    http://www.rcplanet.com/Lunsford_Rac..._p/lns3170.htm

    This is for a mini (1/16) E-Revo or Slash.
    -ksb51rl
    Last edited by ksb51rl; 01-19-2012 at 01:33 PM.
    custom summit crawler parts lol

  8. #8
    RC Qualifier
    Join Date
    Jul 2010
    Location
    astoria
    Posts
    354
    custom summit crawler parts lol

  9. #9
    Marshal ksb51rl's Avatar
    Join Date
    Nov 2006
    Location
    Northern NJ
    Posts
    13,435
    Quote Originally Posted by Scaniris View Post
    On eBay I found some Lunsford hinge pins for Revo. For e-revo, only for the 1/16... So are the Lunsford hinge pins for 1/10 Revo also compatible with the Summit?
    Yes they are.
    I know they're having their break there by your brake drums. No, you're not invited.

  10. #10
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Belgium
    Posts
    305
    Thank you

  11. #11
    RC Qualifier
    Join Date
    Sep 2011
    Location
    Earth, Milky Way.
    Posts
    920
    Are we allowed to post links again?!?
    SPC Power - the best there is

  12. #12
    RC Qualifier
    Join Date
    Jul 2010
    Location
    astoria
    Posts
    354
    i hope there isn't a rule about that.. or are you referring to that pipa sopa nonsense? ... i think they smoked a little too much sopa out of their pipa.
    custom summit crawler parts lol

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts