? on 3.8 Badlands on Half ups 1/2" offsets
I have the jconcepts half ups 1/2" offset wheels. I bought the 3.8 Badlands for them and they seem to fit fine after I grounded down the inner bead ring so the tires will set properly. Proline sent me huge foam inserts that will need to be cut down width wise to fit the tire. Where should I cut them down to? I'm thinking from inner side wall to inner side wall but im affaid it will jam up the tire bead and it wont let the bead sit right on the wheel. Should I cut it back to were the bead ends so the will sit flush on the wheels? Let me know what you think guys!