what hop ups are a must!!!!!!!!!!!

[Jimmie Neutron]

Hey jimmie how do u like the center diff?? Do u still get wheelie action??!!

I still get wheelies from a dead stop. Sometimes from rolling at low speeds, depending on surface traction.
I have 50k in there now, could go up to 80-100k without issues I think. It would increase the wheelies, but also increase the chance of breaking an axle.

1. http://gpmracing.com.hk/catalog/prod...oducts_id=5901
are these the knuckles. is it $24 for 2 or 4? 2. You would need 2 sets for all 4 corners.

2. http://www.amainhobbies.com/product_...ush-Rods-Red-4
these push rods? Those will work for the MERV, but for a few dollars more you can get stainless or titanium push rods and turn buckles with steel hollow balls instead of plastic.

3. and which exactly RPM a arms?
http://www.amainhobbies.com/product_...6-E-Revo-Black
Those? is that for all 4 corners or just 2? What you have linked are for the rear only.

[corey52587]

Yes those are the push rods now dont forget the turnbuckles. The knuckes just come in pairs so order two pairs the rpm ars are sold front an rear so make sure u get fron an rear they are sold seperatly

[Skitlerz]

I saw it mentioned but i'll say it again, T-bone bumpers!

[Nkracl]

Thank you guys!!!!