Results 1 to 8 of 8
  1. #1
    RC poster
    Join Date
    Jan 2012
    Posts
    5

    Novarossi on revo help!

    hello, i have a revo 3.3 and if you can't tell by my username i put more attention into my mustang hobby than the revo because i blew up my 3.3. But my uncle had a savage and he bought the novarossi n528xrp...whatever that means. and he just gave it to me for free! so i was like i guess ill start back with the revo. So i ordered the big block kit, ive already modified the engine mount so that fits and it seems i have to modify the suspension which i just plan to do with a jigsaw so thats not the main problem. However, with the clutchbell on the crankshaft it seems it won't line right up to the transmission, has about a cm off. So what am i to do?? i don't even know how to modify that lol.

    Thanks, any help would be appreciated

  2. #2
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Tanker 822
    Posts
    9,679
    May need to cut the chassis a bit to allow the tranny to move forward.
    The Super Derecho

  3. #3
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Simi Valley, CA
    Posts
    499
    Is the clutch bell too far back from the spur? Like DG said you can oval the tranny mounting holes to move it forward, or you can shim the collet to move the cluch out farther.

  4. #4
    RC poster
    Join Date
    Jan 2012
    Posts
    5
    How would you suggest that i cut it?

  5. #5
    RC poster
    Join Date
    Jan 2012
    Posts
    5
    and the clutch bell goes too far...and yeah i looked at that, but it seems even if i put new holes, i still have to cut the chassis because it won't just slide through. I'd have to make like a "hole" around the trans...if that makes any sense

  6. #6
    RC Champion
    Join Date
    Mar 2009
    Posts
    1,873
    1cm.... that a lot...
    you know.. i never had a sig.. but i do now...

  7. #7
    RC poster
    Join Date
    Jan 2012
    Posts
    5
    yes, yes it is lol

  8. #8
    RC poster
    Join Date
    Jan 2012
    Posts
    5
    Well i pulled out my sawzall, jigsaw, and my drill. Im making it work lol if need be i can post some pics on here if someone is doing the samething and i can show you how i did it.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •