Will mini erevo a-arms fit the Mustang boss 302?

[BROKENSLASH4X4]

Will mini erevo a-arms fit the Mustang boss 302?

[Skitlerz]

they will attach to the chassis but they are going to stick WAY out. What are you looking to do?

[BROKENSLASH4X4]

Just get upgraded a-arms, so i dont have stock haha

will they fit a rally? or still same thing, theyll stick wayy out?

How about the mini slash 4x4 a-arms, are they any different?

[Double G]

All the 1/16 on-road vehicles and the Slash are the same. If in doubt, check the exploded views of each.

[BROKENSLASH4X4]

But will they (The mini slash 4x4 a-arms) make the rallys wheels stick out?

[Double G]

But will they (The mini slash 4x4 a-arms) make the rallys wheels stick out?

See my previous answer.

[Skitlerz]

Mini slash arms are the same as the rally and mustang so no they wont make the wheels stock way out. If you check the parts diagrams for all the 1/16 models if will show u the differences. The e-revo arms and summit arms will be too long. If you want to upgrade from stock then look for 1/16 slash or rally arms. RPM just came out with A-arms for these. I will be upgrading to them if and when i ever break an a-arm

[arcaptainic]

The Rally, Boss 302, KB and Slash are all the same a-arms. The Erevo are quite a bit longer then them and the Mini Summit are just a tad longer than the Erevo. I would assume that RPM makes a-arms for the Rally and mustang etc. but I have never checked.

[Jimmie Neutron]

Front arms on the 1/16 Revo/Summit are the exact same.
Rear arms on the revo are standard wheelbase.
Summit rear arms are swept back 10mm.

The length of all the arms listed above measure the same (hub to hub) when assembled.

[BROKENSLASH4X4]

Thanks guys, cant wait to get my rally!