Page 7 of 13 FirstFirst ... 56789 ... LastLast
Results 241 to 280 of 485
  1. #241
    RC Competitor
    Join Date
    Feb 2013
    Posts
    69
    esc. not sure to replace with stock or go with something better

  2. #242
    RC Qualifier
    Join Date
    May 2012
    Location
    Lafayette,LA.
    Posts
    692
    Bent a rear protrac camber link today at bmx jumps. Good thing I bought these from Lunsford!these metric wrenches from EDS racing are awesome by the way!


    Sent from Oser world

  3. #243
    RC Racer
    Join Date
    Sep 2011
    Location
    SoCal
    Posts
    111
    My spirit was broken when I received my new MMP 2200 kv combo only to find out that the ESC was defective after everything was mounted on my pede. The RC gods must not like me right now. Ptoooey.

  4. #244
    RC Turnbuckle Jr. spenniepoos's Avatar
    Join Date
    Apr 2012
    Location
    Wales in the UK
    Posts
    4,944
    Ripped the sidewall on my front trencher tyre....poo
    Famous last words...watch this!!!!

  5. #245
    RC Racer
    Join Date
    Sep 2011
    Location
    SoCal
    Posts
    111
    Quote Originally Posted by spenniepoos View Post
    Ripped the sidewall on my front trencher tyre....poo
    Just got my trenchers installed on my pede. sucks to hear about the rip. What power system are you using if you don't mind me asking?

  6. #246
    RC Qualifier
    Join Date
    Jan 2013
    Posts
    319
    Quote Originally Posted by harry53187 View Post
    esc. not sure to replace with stock or go with something better
    go with something better and cheaper... like the hobbywing waterproof sc8 120 amp esc.
    I have it and its SOOOOO MUCH BETTER! Plus it has a built on fan

  7. #247
    RC Turnbuckle Jr. spenniepoos's Avatar
    Join Date
    Apr 2012
    Location
    Wales in the UK
    Posts
    4,944
    Quote Originally Posted by noobiznessracin View Post
    Just got my trenchers installed on my pede. sucks to hear about the rip. What power system are you using if you don't mind me asking?
    I am running the hobbywing sct pro 120a esc and a tenshock 4 pole 3500kv 550 motor with 17t pinion and 54t spur with 2s and 3s packs its got lots of torque and speed ....peace ..ps i used rubber epoxy glue and have fixed the sidewall sorted
    Famous last words...watch this!!!!

  8. #248
    RC Racer
    Join Date
    Sep 2011
    Location
    SoCal
    Posts
    111
    Quote Originally Posted by spenniepoos View Post
    I am running the hobbywing sct pro 120a esc and a tenshock 4 pole 3500kv 550 motor with 17t pinion and 54t spur with 2s and 3s packs its got lots of torque and speed ....peace ..ps i used rubber epoxy glue and have fixed the sidewall sorted
    Sweet! That's going to be the same exact power system I'm going to have on mine. Can't wait to have it all setup.

  9. #249
    RC Turnbuckle Jr. spenniepoos's Avatar
    Join Date
    Apr 2012
    Location
    Wales in the UK
    Posts
    4,944
    Quote Originally Posted by noobiznessracin View Post
    Sweet! That's going to be the same exact power system I'm going to have on mine. Can't wait to have it all setup.
    If you need any help dude just pm me or i will catch you on here.....peace
    Famous last words...watch this!!!!

  10. #250
    RC poster
    Join Date
    Feb 2013
    Posts
    3

    broke today

    broke the truck in half LOL! ran into my truck tire doing about 25mph
    looked up all parts looks like $46 to fix it.





  11. #251
    RC Racer
    Join Date
    Jan 2013
    Location
    SWFL
    Posts
    217
    WOW! That pretty awsome! Not the $46 though.
    Someone stole my signature.

  12. #252
    RC Competitor
    Join Date
    Jan 2013
    Location
    Perth Australia
    Posts
    74
    so two days ago i broke top part of rear half shaft

    [IMG][/IMG]

    installed new ones same day

    [IMG][/IMG]

    now i went out the front just to run it after installing aluminum Bearing adapter 6893x and i break the bottom end of half shaft time to upgrade

    [IMG][/IMG]

  13. #253
    RC Qualifier
    Join Date
    Jun 2012
    Location
    United Kingdom
    Posts
    612
    Ouch! How? Broken chassis and a A arm!

  14. #254
    RC Qualifier
    Join Date
    Jun 2012
    Location
    United Kingdom
    Posts
    612
    @saltwater....reckon a bumper (RPM/TBone) would have saved that.... :-(

  15. #255
    RC Competitor
    Join Date
    Jan 2013
    Location
    Perth Australia
    Posts
    74
    Quote Originally Posted by o0wiz0o View Post
    @saltwater....reckon a bumper (RPM/TBone) would have saved that.... :-(
    The way that looks I don't think anything would of saved it

  16. #256
    RC Turnbuckle Jr. spenniepoos's Avatar
    Join Date
    Apr 2012
    Location
    Wales in the UK
    Posts
    4,944
    Now thats a good crunch no bumper would have helped i think .....peace
    Famous last words...watch this!!!!

  17. #257
    RC Racer
    Join Date
    Feb 2013
    Location
    USA
    Posts
    230
    Quote Originally Posted by CoolKD View Post
    Broke a little bit more off the body around the rear body holes
    So far that's the only breaking I'm doing to it..
    Same here and I'm running a 3S Lipo no problems except the body

  18. #258
    RC Qualifier
    Join Date
    May 2008
    Location
    Louisiana
    Posts
    629
    Cracked my body, still useable but bad cracks. I really need a wheelie bar!

  19. #259
    RC Racer
    Join Date
    Jan 2013
    Posts
    169
    Yikes the pede broken in half!!

    I burned a bearing out of the villenion on the first run of 3s. Was back running in an hour!

    What was left


  20. #260
    RC Racer
    Join Date
    May 2012
    Location
    Atlanta, GA
    Posts
    121
    after 4 minutes of running, I finally broke the magnet in my motor. Truck would not move. All 4 wheels were locked up.

  21. #261
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676
    Ouch. $70 and 3wks or so and I will have a new one. Pede down!





    Everything overpowered...

  22. #262
    RC Qualifier
    Join Date
    Jan 2013
    Posts
    319
    stripped my desperadoes and broke an a arm and lost a couple screws and almost lost 2 mip pins

  23. #263
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676
    blue loc-tite is your friend!
    Everything overpowered...

  24. #264
    RC Turnbuckle Jr. spenniepoos's Avatar
    Join Date
    Apr 2012
    Location
    Wales in the UK
    Posts
    4,944
    Use red on your mips dude thats what they recommended and you can use a solder iron to take them off and you can use hpi grub screws on your mips that connect to the drive outputs hpi part no. 86094................peace
    Famous last words...watch this!!!!

  25. #265
    RC Qualifier
    Join Date
    Jan 2013
    Posts
    319
    Quote Originally Posted by spenniepoos View Post
    Use red on your mips dude thats what they recommended and you can use a solder iron to take them off and you can use hpi grub screws on your mips that connect to the drive outputs hpi part no. 86094................peace
    I used too much red loctite..... So much that i had to move the axles around in my hand for 20 min each axle to "unglue" all of the moving parts. And ive seen to many people break those HPI grub screws.....They are not meant to hold up to this kind of power.

  26. #266
    RC Turnbuckle Jr. spenniepoos's Avatar
    Join Date
    Apr 2012
    Location
    Wales in the UK
    Posts
    4,944
    Quote Originally Posted by blazer View Post
    I used too much red loctite..... So much that i had to move the axles around in my hand for 20 min each axle to "unglue" all of the moving parts. And ive seen to many people break those HPI grub screws.....They are not meant to hold up to this kind of power.
    Well dont use to much red and you say the grubs snap they have not with me and i have used them for over a year now.............peace
    Famous last words...watch this!!!!

  27. #267
    RC Qualifier
    Join Date
    Dec 2011
    Location
    Okanagan Valley B.C.
    Posts
    726
    Quote Originally Posted by blazer View Post
    And ive seen to many people break those HPI grub screws.....They are not meant to hold up to this kind of power.
    Ya I hear that, I been snapping alot of them. Thinking I might try some revo pins and just grind them to fit.
    O.S.21 Nitro Revo, Stampede 4x4, 2 Axial Honcho's

  28. #268
    RC Champion
    Join Date
    Dec 2010
    Location
    Michigan
    Posts
    1,106
    Yesterday I cracked the case on my lipo and split my new ford body in half.
    Stampede 4x4
    Anza Slash VXL
    Rustler VXL

  29. #269
    RC Racer
    Join Date
    Sep 2011
    Location
    SoCal
    Posts
    111
    Smoked my HW wp sc8 esc while trying to use a 3s for the first time. Sucks waiting for parts to arrive.... sigh

  30. #270
    RC Enthusiast
    Join Date
    Jan 2013
    Location
    Baltimore, MD
    Posts
    44
    Messed up my spur gear today, pinon came loss ( my own stupid fault never checked the pinon since i bought the truck, four months ago.... live and learn) and screwed the spurs teeth up pretty good in places... aready ordered parts and i figured that i might as well get the king headz motor mount and clear gear cover to boot so i guess its not all bad but i agree waiting for parts sucks.......

  31. #271
    RC poster
    Join Date
    Mar 2013
    Posts
    17
    Purchased my first and my last Integy product. Bought the metal universal rear drive shafts for my Rustler. They lasted less than 5 minutes - seriously, LESS than 5 minutes. The rear shaft broke right at thread after the HEX nut. The tire just flew off with the nut still on it car flipped liked never before. 35.00 bucks down the drain. I'm hoping they are covered under warranty though.

  32. #272
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Colorado
    Posts
    304
    i broke my maxxs servo again which means upgrade time
    what's up guys

  33. #273
    RC Enthusiast
    Join Date
    Mar 2013
    Location
    Lincoln Nebraska
    Posts
    36
    Not today but a pretty good bounce off a fire hydrant...




  34. #274
    RC Enthusiast
    Join Date
    Mar 2013
    Location
    Lincoln Nebraska
    Posts
    36
    This one wasn't too bad



    Until...


  35. #275
    RC Turnbuckle Jr. spenniepoos's Avatar
    Join Date
    Apr 2012
    Location
    Wales in the UK
    Posts
    4,944
    You are not having a good day are you dude I hope you get up and running soon......peace
    Famous last words...watch this!!!!

  36. #276
    RC Qualifier
    Join Date
    Jun 2012
    Location
    United Kingdom
    Posts
    612
    Spur finally died....has Ben making a racket for a while and a inner bearing on the rear Tekno carrier finally exploded...

  37. #277
    RC Enthusiast
    Join Date
    Feb 2012
    Location
    Norway
    Posts
    26
    To my surprise I broke my T-Bone Racing rear bumper. I contacted TBR and they sent be a new one under there lifetime warranty. They where very quick to respond too. Very good customer care I would say.
    The broken bumper didn't stop me from continue to drive and at the end of the pack the body was completely shredded because there where no rear bumper to protect the rear..
    Stampede 4x4 VXL Pro-Line Trencher

  38. #278
    RC Competitor
    Join Date
    Aug 2012
    Posts
    74
    Stripped my 4th spur gear in 2 days. ***

  39. #279
    RC Competitor
    Join Date
    Aug 2012
    Posts
    74
    Quote Originally Posted by baylorar View Post
    Stripped my 4th spur gear in 2 days. ***
    Turns out, bearing failure in the motor

  40. #280
    RC Racer
    Join Date
    Feb 2013
    Location
    Florida Panhandle
    Posts
    152
    Quote Originally Posted by yonzariq View Post
    stripped a hex and wheel
    after fixing it that same wheel broke in half...
    also busted a outer bearing on the same wheel
    Lol just stripped a hex and almost stripped the wheel lucky i found it in time

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •