Page 11 of 17 FirstFirst ... 910111213 ... LastLast
Results 401 to 440 of 644
  1. #401
    RC Champion
    Join Date
    Jan 2001
    Location
    Brighton, TN
    Posts
    1,039
    Mine has been stored for two years, I got it out last night and charged everything. Then ran 3 tanks through it today. I've really missed it.
    Revo 2.5R T-Maxx 2.5
    1/16 Revo VXL QR-1 and DR-1

  2. #402
    RC Qualifier
    Join Date
    Jul 2011
    Location
    S. Jersey
    Posts
    719
    Just installed RB mods turbo head on mine. It really woke the 3.3 up.

    Jato 3.3, Revo .28 JL Max, Nitro Stampede 3.3

  3. #403
    RC Champion
    Join Date
    Dec 2010
    Location
    Dover NH
    Posts
    1,365
    Put in an envy racing slipper clutch elimator, my lhs just setup a cnc machine and this is one of their first parts, he tossed one in my bag on the way out the door, pretty cool part, gotta be careful though.
    15 IS Enough, Time to thin down the fleet some.

  4. #404
    RC Champion
    Join Date
    Jul 2006
    Posts
    2,200
    Put in an envy racing slipper clutch elimator
    Gee, I wonder who they got that idea from?

    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]

    I better look over my patent paperwork again.
    Last edited by Oomp; 05-05-2012 at 05:09 PM.
    Believe 1/2 of what you see,and 0 of what you hear

  5. #405
    RC Qualifier
    Join Date
    Dec 2011
    Location
    Okanagan Valley B.C.
    Posts
    731
    Took them out to the parking lot for an early morning tuning session.
    O.S.21 Nitro Revo, Stampede 4x4, 2 Axial Honcho's

  6. #406
    RC Racer
    Join Date
    Jan 2010
    Location
    California
    Posts
    205
    Took em out for some runs




    Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
    "My Ideas always work sometimes"

  7. #407
    RC poster
    Join Date
    Oct 2011
    Location
    Calgary, Alberta
    Posts
    13
    Installed Traxxas 17mm hex's (5353x), checked & re-checked EVERYTHING and refreshed my batt's so I can get out and break in the new 3.3 tomorrow
    -D-

  8. #408
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the wet stuff on the hot stuff
    Posts
    9,763
    Yesterday: put a new air filter on, cleaned the second, installed a Losi 3.4 carb, cleaned up and rebuilt the Traxxas carb and took it out for a couple tanks before work (14.5hrs worth, ugh!).
    The Super Derecho

  9. #409
    RC Racer
    Join Date
    Mar 2012
    Location
    Jo mama's house
    Posts
    154
    Added Carbon wing, Proline Trencher X tires/ Desperado wheels. And a brand spankin new OS21TM

    5.9 Savage XL
    4.6 Savage XL
    Losi 5ive T

  10. #410
    RC Competitor
    Join Date
    Feb 2012
    Location
    Southington CT
    Posts
    82
    Quote Originally Posted by Double G View Post
    Yesterday: put a new air filter on, cleaned the second, installed a Losi 3.4 carb, cleaned up and rebuilt the Traxxas carb and took it out for a couple tanks before work (14.5hrs worth, ugh!).
    Hey man can you give us a review of that losi carb and power differences between the two when you get a chance? Thanks
    Revo 3.3 with Ofna Force .32
    Revo 2.5 stock

  11. #411
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the wet stuff on the hot stuff
    Posts
    9,763
    Quote Originally Posted by NASTY5.0 View Post
    Hey man can you give us a review of that losi carb and power differences between the two when you get a chance? Thanks
    Haven't had much chance to run it due to work and two kids. I do know that the Traxxas factory settings are too rich on the HSN and lean on the LSN. I believe Losi factory settings are 2.75 on each but don't hold me to that. I may be close to them.
    The Super Derecho

  12. #412
    RC Qualifier
    Join Date
    Jul 2008
    Location
    Houston, TX.
    Posts
    869
    Replaced clutch bearings, clutch spring, broken motor mount, new air filter, adjusted all suspension linkage, maticasly, ran and tuned her, running beatifuly. Just bought the 2.4 remote and receiver for my stampede and about to buy new receiver for revo.


    It's been a lot of work, I know most people wouldn't understand but us RC guys do, the revo and pede are dialed in!!!!

  13. #413
    RC Turnbuckle Jr. fallonguy's Avatar
    Join Date
    May 2006
    Location
    Dayton Nv.
    Posts
    3,181
    replaced the dust caps on the axle shaft.
    I wanted to put a really cool signature but I ran

  14. #414
    RC Enthusiast
    Join Date
    Jan 2012
    Posts
    42
    Installed a buku clutch

  15. #415
    RC Racer
    Join Date
    Mar 2012
    Location
    Australia
    Posts
    237
    well after a week of putting it back together from a complete stripped chassis (my first time for a revo)

    added RPM arms, the red pushrods turnbuckles, swaybar kit, slayer rx box, the other throttle mount, rear wing, new harder springs, new body post mounts... then finding out my chassis/engine mount was bent (fixed it with a screwdriver ehehe)
    also blacked out my wheels/bumpers with abit of oven cleaner.

    was heaps happy








    went out for a few runs with my mate just up and down the street



    then after todays little session around this pre-construction site (leveled out area with mounds/piles of dirt/rock/concrete everywhere)






    Today ended with what i guess a rock getting into my gears eating a spur gear... was getting pretty dark anyways.
    OkGo Performance, RC Division.

  16. #416
    RC poster
    Join Date
    Oct 2011
    Location
    Calgary, Alberta
    Posts
    13
    Broke a header, replaced that w/modded one (Getting the Revo Platinum one next time I hit L.H.S.) I cut off a 2 inch straight piece of exhaust deflector (Savage) and added that to the cut header, slid that into the original coupler (Still attached to the muffler) added a couple zip ties annnnd voila!! Back @ it...
    Added some braided fuel line also.



    -D-

  17. #417
    RC Turnbuckle Jr. fallonguy's Avatar
    Join Date
    May 2006
    Location
    Dayton Nv.
    Posts
    3,181
    I like the braided fuel it really makes it look good
    I wanted to put a really cool signature but I ran

  18. #418
    RC poster
    Join Date
    Oct 2011
    Location
    Calgary, Alberta
    Posts
    13
    Thanks Fallonguy..
    I also did the spring loaded brake pad mod and opened up the stinger to 15/64 today. I think next is going to be tightening the steering radius.
    Quote Originally Posted by fallonguy View Post
    I like the braided fuel it really makes it look good
    -D-

  19. #419
    RC Qualifier
    Join Date
    Dec 2011
    Location
    Okanagan Valley B.C.
    Posts
    731
    Installed a set of Proline-PRO110300 on my 2.5 today but the little motor and tall gears didn't like it all that much.

    So of course they ended up on my 3.3 instead with 14/40 gears.



    O.S.21 Nitro Revo, Stampede 4x4, 2 Axial Honcho's

  20. #420
    RC Champion
    Join Date
    Nov 2010
    Location
    vermont
    Posts
    1,029
    Quote Originally Posted by Coletrain View Post
    Installed a buku clutch
    Sent u a pm.. How do u like it?
    Nitro rustler 2.5 x2, lrp revo,

  21. #421
    RC Enthusiast
    Join Date
    Nov 2011
    Posts
    46
    Installed o.s. .21 zx-b YEAH!

  22. #422
    RC Qualifier
    Join Date
    May 2008
    Location
    Queens, ny
    Posts
    285
    finally finished painting my new body.... Recharged all batteries... Added fuel and set off to bash!! 2 minutes later I'd destroyed an a-arm within 30 minutes I would head to my lhs and purchased rpm arms so now I'm good to go!!
    was down but now I'm up... Where's my beast!!!

  23. #423
    RC Competitor
    Join Date
    Mar 2011
    Posts
    68




    Throttle servo died. So I replaced the servo with a Hitec 645MG, upgraded to a extended chassis, and installed a .27 engine. My revo is a beast.
    Last edited by Ricksrevo1981; 06-01-2012 at 02:35 AM.

  24. #424
    RC Racer
    Join Date
    Apr 2012
    Posts
    227
    [/QUOTE]Throttle servo died. So I replaced the servo with a Hitec 645MG, upgraded to a extended chassis, and installed a .27 engine. My revo is a beast.[/QUOTE]

    Indeed she is a beast. That thing looks sick, Madmax road warrior style. I like it!!
    Which wheels and tires are those?

  25. #425
    RC Competitor
    Join Date
    Mar 2011
    Posts
    68
    Throttle servo died. So I replaced the servo with a Hitec 645MG, upgraded to a extended chassis, and installed a .27 engine. My revo is a beast.[/QUOTE]

    Indeed she is a beast. That thing looks sick, Madmax road warrior style. I like it!!
    Which wheels and tires are those?[/QUOTE]

    Thanks.....Losi 420 dish wheels dyed on 40 series bowties

  26. #426
    RC Competitor
    Join Date
    May 2012
    Location
    Pennsylvania
    Posts
    76
    Ripped it to see how it handles with the New Pro Line Badlands, new wing, shock springs (green front, Gold rear), 50 wt. Shock oil all around with stock pistons, & Tekno RC sway bar installed in the front only. BIG difference in a good way. Front tires stay planted, wing helps it track nice and straight at full throttle and shock set up made a nice difference too. Shocks are not set up to bash because I mainly rip around the yard and run on grass or dirt and hit track style jumps. Looking forward to putting the Badlands to the test...So far, they are Killer tires. It was a good day!

  27. #427
    RC Competitor
    Join Date
    May 2012
    Location
    Pennsylvania
    Posts
    76
    [IMG][/IMG]

  28. #428
    RC Turnbuckle Jr. fallonguy's Avatar
    Join Date
    May 2006
    Location
    Dayton Nv.
    Posts
    3,181
    WOW nice looking truck
    I wanted to put a really cool signature but I ran

  29. #429
    RC Competitor
    Join Date
    May 2012
    Location
    Pennsylvania
    Posts
    76
    Thank you fallonguy! I appreciate the nice comment!

  30. #430
    RC Turnbuckle Jr. fallonguy's Avatar
    Join Date
    May 2006
    Location
    Dayton Nv.
    Posts
    3,181
    Great paint job. Did you do it yourself?
    I wanted to put a really cool signature but I ran

  31. #431
    RC Competitor
    Join Date
    May 2012
    Location
    Pennsylvania
    Posts
    76
    Thank you! I don't get the credit for this one. Traxxas does. It is a stock Prographix 3.3 body but I took off all of the stickers from the body because I thought they were taking away from paint scheme. Your nice comment tells me I made the right decision! Thanks again!

  32. #432
    RC Racer
    Join Date
    Dec 2010
    Location
    Kauttua city, Finland
    Posts
    197
    Ordered a Bu-Ku small block pipe, not the Revo model, but I should find a way to mount it. Also ordered bearing kit and some titanium screws. Putting the transmission back together. Engine should be fully assembled soon also.
    |Traxxas|Revo|3.3|#5309|FIN|

  33. #433
    RC Turnbuckle Jr. fallonguy's Avatar
    Join Date
    May 2006
    Location
    Dayton Nv.
    Posts
    3,181
    I have the Buku pipe on my revo with the OS .21TM engine I really like it.
    I wanted to put a really cool signature but I ran

  34. #434
    RC Champion
    Join Date
    Nov 2010
    Location
    vermont
    Posts
    1,029
    today i got my new lrp z28 ad dynamite 053 pipe. installation didnt take any time at all.. everything went together smoothly. using stock clutch for now until i can get something good. havent run any fuel in it yet, i want to do some more work to it first..






    as u can see i didnt have to hack the body up too much.. cant wait to try this bad boy
    Nitro rustler 2.5 x2, lrp revo,

  35. #435
    RC Turnbuckle Jr. fallonguy's Avatar
    Join Date
    May 2006
    Location
    Dayton Nv.
    Posts
    3,181
    WOW that look nice looks like you're going the have a fast truck.
    I wanted to put a really cool signature but I ran

  36. #436
    RC Champion
    Join Date
    Nov 2010
    Location
    vermont
    Posts
    1,029
    thanks man, i have a good feel about this one.. i have had lrp revos before.. i had 3 lrp .30s in other revos and a .28 in another revo back when they first came out.. out of all them i remember the ,28 being a higher reving engine so i went with that one.. im geared at 17/36 robinson racing gears.. should be fast.. i know my lrp 30 was pretty quick on that gearing. had gobs of torque but needed higher revs to get that top speed. il get some vids when i finsih
    Nitro rustler 2.5 x2, lrp revo,

  37. #437
    RC Turnbuckle Jr. fallonguy's Avatar
    Join Date
    May 2006
    Location
    Dayton Nv.
    Posts
    3,181
    Great I would like to see some videos of your revo running
    I wanted to put a really cool signature but I ran

  38. #438
    RC Competitor
    Join Date
    May 2012
    Location
    Pennsylvania
    Posts
    76
    Looks GREAT man! That bad boy is going to be throwing up some wicked roost!

  39. #439
    RC Turnbuckle Jr. fallonguy's Avatar
    Join Date
    May 2006
    Location
    Dayton Nv.
    Posts
    3,181
    Took my revo out and had a blast today Have the OS .21TM and Buku pipe had a great time.

    Also noticed I only need one more post for 3000 and this is it
    I wanted to put a really cool signature but I ran

  40. #440
    RC Racer
    Join Date
    Jun 2011
    Location
    blackpool england
    Posts
    203
    sold it way too cheap..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •